NORWAY · WELLBORES · NPDID 7786

7220/11-3 A

Exploration · Appraisal · Suspended · Oil/gas · Lundin Norway AS · PL 609

1 document: reports, logs, and plots →

What was run in 7220/11-3 A and how the hole was built: the logs with their intervals, the casing strings with leak-off tests, and the mud at depth.

The table below says which logs were run and over what interval. The curves themselves are held in Diskos, Norway's national data repository; its public portal lists what has been released for a wellbore and can be ordered for an administrative fee. Diskos public portal →

Logs

LogTop, mBase, m
MWD - ATK GR RES PWD DIR ACMWD measurement while drilling · GR gamma ray · RES resistivity · PWD pressure while drilling · DIR directional survey · AC acoustic (sonic)1,0771,141
MWD - RES GR PWD DIR ACMWD measurement while drilling · RES resistivity · GR gamma ray · PWD pressure while drilling · DIR directional survey · AC acoustic (sonic)1,1411,240

Casing and leak-off tests

CasingDiameter, inDepth, mHole, inHole depth, mLOT/FIT, g/cm³Test
Conductor30493.6364940—
Surf.cond.20590.1265981.41LOT
Pilot hole—5989 7/85980—
Interm.13 3/81,07717 1/21,0851.4LOT
Interm.9 5/81,904.712 1/41,9131.45LOT
Liner72,133.58 1/22,1350—

Drilling mud

10 READINGS · BY DEPTH

Depth, mWeight, g/cm³Viscosity, mPa·sYield point, PaType
1,1241.2120Water based
1,2091.2160Water based
1,3011.2140Water based
1,5191.2140Water based
1,7021.21150Water based
1,9131.1580Water based
1,9131.21140Water based
2,0251.16110Water based
2,1351.1310Water based
2,1351.14110Water based

The words under each tool string are Petrora's reading of the standard codes in it; a code we do not recognize is left as filed. No composite log has been released for this well, so there is no file to open beside these runs.

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). Log names are the Directorate's tool strings as filed; the plain-word readings beside them are Petrora's, from common industry abbreviations. Depths are metres along the wellbore from the kelly bushing; diameters are inches, as filed.

Developers: this page as JSON is GET /v1/data/norway/wells/7786, documented in the API reference.