NORWAY · WELLBORES · NPDID 7813

35/11-18 A

Exploration · Appraisal · P&A · Oil/gas · Wintershall Norge AS · PL 248

1 document: reports, logs, and plots →

Core 1

Core 1 of 35/11-18 A was cut from 3,705.8 to 3,759.3 m, 53.5 m in the Oseberg Fm and Drake Fm. The Directorate lists core samples from it as available.

53.5
m cored · 3,705.8 to 3,759.3
1
test or fluid sample across it
2
formation boundaries crossed
7
log runs across it

SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE

Down the core

TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS

DEPTHFORMATIONCOREPHOTOSTHINSEC.SLIDESTESTS3,705.83,759.3 m3,7103,7203,7303,7403,750Oseberg Fm, 3,705.8 to 3,749.5 mOseberg FmDrake Fm, 3,749.5 to 3,759.3 mDrake FmCore 1, 3,705.8 to 3,759.3 mCore 153.5 m

What it was cut through

UnitFrom, mTo, mCore in it, m
Oseberg Fm3,705.83,749.543.7
Drake Fm3,749.53,759.39.8

Every formation top in 35/11-18 A →

Tests and fluid samples across it

  • DST 23,704 to 3,724 mOil 856 Sm³/d · gas 219,060 Sm³/d

Full test results for the well →

Logs run across it

7 RUNS COVERING PART OF THE INTERVAL

  • VSPvertical seismic profile1,667 to 3,847 m
  • IMAGE SONsonic1,682 to 3,857 m
  • PRESSURE NMR3,416 to 3,849 m
  • GR RES NEU DENgamma ray · resistivity · neutron · density3,417 to 3,857 m
  • MWD - GR RES PWD DIR NEU DENmeasurement while drilling · gamma ray · resistivity · pressure while drilling · directional survey · neutron · density3,424 to 3,857 m
  • SWCsidewall cores3,583 to 3,848 m
  • SAMPLE3,590 to 3,830 m

Logs, casing, and the files you can open →

Seeing the core itself

The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.

Developers: this page as JSON is GET /v1/data/norway/wells/7813/cores/1, documented in the API reference.