NORWAY · WELLBORES · NPDID 7959

7220/11-3 AR

Exploration · Appraisal · P&A · Oil/gas · Lundin Norway AS · PL 609

1 document: reports, logs, and plots →

Core 2

Core 2 of 7220/11-3 AR was cut from 2,140.5 to 2,140.9 m, 0.4 m in the Ørn Fm. The Directorate lists core samples from it as available.

0.4
m cored · 2,140.5 to 2,140.9
6
log runs across it

SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE

Down the core

TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS

DEPTHFORMATIONCOREPHOTOSTHINSEC.SLIDESTESTS2,140.52,140.9 mØrn Fm, 2,140.5 to 2,140.9 mØrn FmCore 2, 2,140.5 to 2,140.9 mCore 22.1 m not cored

The Directorate has no photographs, thin sections, core-derived slides, or tests on file inside this core's interval. The well's core reports, where there are any, are below.

What it was cut through

UnitFrom, mTo, mCore in it, m
Ørn Fm2,140.52,140.90.4

Every formation top in 7220/11-3 AR →

Logs run across it

6 RUNS COVERING PART OF THE INTERVAL

  • MWD - OTK BCPM2 LTK STKmeasurement while drilling · OnTrak gamma ray and resistivity2,091 to 2,596 m
  • VSIversatile seismic imager2,115 to 2,161 m
  • VSIversatile seismic imager2,115 to 2,161 m
  • HRLA PEX ADT GRhigh-resolution laterolog array · Platform Express (resistivity, density, neutron) · gamma ray2,127 to 2,592 m
  • XPT CMR NEXT GRformation pressure tester (PressureXpress) · combinable magnetic resonance · gamma ray2,127 to 2,573 m
  • MSCT GRmechanical sidewall coring tool · gamma ray2,138 to 2,579 m

Logs, casing, and the files you can open →

Seeing the core itself

The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.

Developers: this page as JSON is GET /v1/data/norway/wells/7959/cores/2, documented in the API reference.