What was run in 7222/1-1 and how the hole was built: the logs with their intervals, the casing strings with leak-off tests, and the mud at depth.
The table below says which logs were run and over what interval. The curves themselves are held in Diskos, Norway's national data repository; its public portal lists what has been released for a wellbore and can be ordered for an administrative fee. Diskos public portal →
Logs
| Log | Top, m | Base, m |
|---|---|---|
| USIT CBL PPC GR LEH ECRDUSIT ultrasonic imager (cement and casing) · CBL cement bond log · PPC powered positioning caliper · GR gamma ray | 434 | 2,123 |
| MWD - DIRMWD measurement while drilling · DIR directional survey | 458 | 514 |
| MWD - DIR GR RESMWD measurement while drilling · DIR directional survey · GR gamma ray · RES resistivity | 514 | 737 |
| VSP GR LEH ECRDVSP vertical seismic profile · GR gamma ray | 515 | 2,390 |
| MWD - DIR GR RES SONMWD measurement while drilling · DIR directional survey · GR gamma ray · RES resistivity · SON sonic | 737 | 1,015 |
| MWD - GR RES DIR SONMWD measurement while drilling · GR gamma ray · RES resistivity · DIR directional survey · SON sonic | 1,015 | 1,479 |
| HNGS XPT NGIHNGS spectral gamma ray (hostile environment) · XPT formation pressure tester (PressureXpress) | 1,107 | 1,550 |
| MWD - DUMB IRONMWD measurement while drilling | 1,479 | 1,542 |
| MWD - GR RES DIR SON ECDMWD measurement while drilling · GR gamma ray · RES resistivity · DIR directional survey · SON sonic · ECD equivalent circulating density | 1,479 | 1,556 |
| MWD - DUMB IRONMWD measurement while drilling | 1,556 | 1,556 |
| MWD - GR RES SON STETH PRESMWD measurement while drilling · GR gamma ray · RES resistivity · SON sonic · PRES pressure | 1,556 | 1,556 |
| MWD - IRON DUMBMWD measurement while drilling | 1,556 | 1,677 |
| MWD - GR RES DIR SON ECD LWDMWD measurement while drilling · GR gamma ray · RES resistivity · DIR directional survey · SON sonic · ECD equivalent circulating density · LWD logging while drilling | 1,677 | 2,125 |
| MWD - GR RES CAL DEN NEUMWD measurement while drilling · GR gamma ray · RES resistivity · CAL caliper · DEN density · NEU neutron | 2,125 | 2,125 |
| MWD - GR RES DEN NEU SON STETHMWD measurement while drilling · GR gamma ray · RES resistivity · DEN density · NEU neutron · SON sonic | 2,125 | 2,338 |
| XPT GR LEH ECRDXPT formation pressure tester (PressureXpress) · GR gamma ray | 2,249 | 2,320 |
| MWD - GR RES DEN NEU SONMWD measurement while drilling · GR gamma ray · RES resistivity · DEN density · NEU neutron · SON sonic | 2,338 | 2,400 |
Casing and leak-off tests
| Casing | Diameter, in | Depth, m | Hole, in | Hole depth, m | LOT/FIT, g/cm³ | Test |
|---|---|---|---|---|---|---|
| Conductor | 36 | 505.6 | 42 | 511 | 0 | — |
| Surf.cond. | 20 | 732.2 | 24 | 738 | 0 | — |
| Pilot hole | — | 740 | 8 1/2 | 740 | 0 | — |
| — | — | 740 | — | 740 | 1.39 | LOT |
| Interm. | 13 3/8 | 1,007.8 | 16 | 1,015 | 0 | — |
| — | — | 1,018 | — | 1,018 | 1.88 | LOT |
| Liner | 9 5/8 | 2,124 | 12 1/4 | 2,125 | 0 | — |
| — | — | 2,128 | — | 2,128 | 1.24 | FIT |
| Open hole | — | 2,400 | 8 1/2 | 2,400 | 0 | — |
Drilling mud
11 READINGS · BY DEPTH
| Depth, m | Weight, g/cm³ | Viscosity, mPa·s | Yield point, Pa | Type |
|---|---|---|---|---|
| 458 | 1.03 | 1 | 0 | -- |
| 741 | 1.14 | 13 | 0 | Ob |
| 907 | 1.1 | 12 | 0 | Ob |
| 1,015 | 1.2 | 16 | 0 | Ob |
| 1,388 | 1.3 | 21 | 0 | Ob |
| 1,542 | 1.22 | 13 | 0 | Ob |
| 1,615 | 1.14 | 14 | 0 | Ob |
| 2,095 | 1.1 | 14 | 0 | Ob |
| 2,104 | 1.14 | 15 | 0 | Ob |
| 2,277 | 1.1 | 14 | 0 | Ob |
| 2,400 | 1.1 | 12 | 0 | Ob |
The words under each tool string are Petrora's reading of the standard codes in it; a code we do not recognize is left as filed. No composite log has been released for this well, so there is no file to open beside these runs.
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). Log names are the Directorate's tool strings as filed; the plain-word readings beside them are Petrora's, from common industry abbreviations. Depths are metres along the wellbore from the kelly bushing; diameters are inches, as filed.
Developers: this page as JSON is GET /v1/data/norway/wells/7987, documented in the API reference.