NORWAY · WELLBORES · NPDID 8013

35/11-20 A

Exploration · Appraisal · P&A · Oil · Wintershall Norge AS · PL 248 F

1 document: reports, logs, and plots →

Core 2

Core 2 of 35/11-20 A was cut from 3,898.5 to 3,973.7 m, 75.2 m in the Sognefjord Fm and Heather Fm. The Directorate lists core samples from it as available.

75.2
m cored · 3,898.5 to 3,973.7
1
formation boundary crossed
3
log runs across it

SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE

Down the core

TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS

DEPTHFORMATIONCOREPHOTOSTHINSEC.SLIDESTESTS3,898.53,973.7 m3,9103,9203,9303,9403,9503,9603,970Sognefjord Fm, 3,898.5 to 3,901 mSognefjord FmHeather Fm, 3,901 to 3,973 mHeather FmCore 2, 3,898.5 to 3,973.7 mCore 275.2 m

The Directorate has no photographs, thin sections, core-derived slides, or tests on file inside this core's interval. The well's core reports, where there are any, are below.

What it was cut through

UnitFrom, mTo, mCore in it, m
Sognefjord Fm3,898.53,9012.5
Heather Fm3,9013,97372

Every formation top in 35/11-20 A →

Logs run across it

3 RUNS COVERING PART OF THE INTERVAL

  • LAIT TLD HGNS HNGSthree-detector lithology density · gamma ray and neutron sonde · spectral gamma ray (hostile environment)3,581 to 3,973 m
  • XPT ECS CMR EDTCformation pressure tester (PressureXpress) · elemental capture spectroscopy · combinable magnetic resonance · telemetry cartridge with gamma ray3,581 to 3,973 m
  • LWD - CORElogging while drilling3,898 to 3,973 m

Logs, casing, and the files you can open →

Seeing the core itself

The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.

Developers: this page as JSON is GET /v1/data/norway/wells/8013/cores/2, documented in the API reference.