NORWAY · WELLBORES · NPDID 8043

25/2-18 A

Exploration · Appraisal · P&A · Oil · Det norske oljeselskap ASA · Hugin Satellitter · PL 442

1 document: reports, logs, and plots →

What was run in 25/2-18 A and how the hole was built: the logs with their intervals, the casing strings with leak-off tests, and the mud at depth.

The table below says which logs were run and over what interval. The curves themselves are held in Diskos, Norway's national data repository; its public portal lists what has been released for a wellbore and can be ordered for an administrative fee. Diskos public portal →

Logs

LogTop, mBase, m
LWD - DI RES GR NEU DEN SONLWD logging while drilling · RES resistivity · GR gamma ray · NEU neutron · DEN density · SON sonic1,5554,066
RES SON DEN NEU SP GRRES resistivity · SON sonic · DEN density · NEU neutron · SP spontaneous potential · GR gamma ray3,6754,055
MSCT GRMSCT mechanical sidewall coring tool · GR gamma ray3,6944,035
PP LITHOS MAGN RESRES resistivity3,6994,044
MDT MINIDST TTMDT modular formation dynamics tester3,7013,792

Casing and leak-off tests

CasingDiameter, inDepth, mHole, inHole depth, mLOT/FIT, g/cm³Test
Conductor30222362140—
Surf.cond.20444.5264501.32LOT
Pilot hole—4509 7/84500—
Surf.cond.13 3/81,533.5161,5411.58FIT
Interm.9 5/83,68012 1/43,6851.88LOT
Liner74,0508 1/200—
Open hole—4,0668 1/24,0660—

Drilling mud

7 READINGS · BY DEPTH

Depth, mWeight, g/cm³Viscosity, mPa·sYield point, PaType
1,5331.4320Versatec
2,0641.37280Versatec obm
2,9001.4300Nacl brine
2,9671.37290Versatec obm
3,6851.17210Versatec obm
3,6851.4290Versatec obm
4,0661.17210Versatec obm

The words under each tool string are Petrora's reading of the standard codes in it; a code we do not recognize is left as filed. No composite log has been released for this well, so there is no file to open beside these runs.

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). Log names are the Directorate's tool strings as filed; the plain-word readings beside them are Petrora's, from common industry abbreviations. Depths are metres along the wellbore from the kelly bushing; diameters are inches, as filed.

Developers: this page as JSON is GET /v1/data/norway/wells/8043, documented in the API reference.