6507/10-1
Exploration · Wildcat · P&A · Dry · BP Norway Limited U.A. · PL 075
Core 2
Core 2 of 6507/10-1 was cut from 3,073.6 to 3,081.9 m, 8.3 m in the Ror Fm and Tilje Fm. The Directorate lists core samples from it as available.
- 8.3
- m cored · 3,073.6 to 3,081.9
- 2
- photographs
- 1
- formation boundary crossed
- 6
- log runs across it
SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE
Down the core
TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS
Photographs of this core
2 PHOTOS · HOSTED BY THE NORWEGIAN OFFSHORE DIRECTORATE
What it was cut through
Palynology slides made from core
0 IN THE INTERVAL
1 more slide was made from cuttings or sidewall cores at depths inside this interval, not from the core itself. Every slide from the well →
Logs run across it
6 RUNS COVERING PART OF THE INTERVAL
- VSPvertical seismic profile475 to 3,685 m
- HDThigh-resolution dipmeter2,770 to 3,415 m
- ISF BHCS MSFL CAL GR SPinduction spherically focused log · micro-spherically focused log · caliper · gamma ray · spontaneous potential2,770 to 3,697 m
- LDL CNL CAL GRlitho-density log · compensated neutron log · caliper · gamma ray2,770 to 3,697 m
- CST GRsidewall core sample taker · gamma ray2,775 to 3,667 m
- RFT GRrepeat formation tester · gamma ray2,884 to 3,658 m
Core and petrography reports on file for the well
- Final core report 1-2pdf · 319 KB
- Geochemical analysis of four jurassic corepdf · 557 KB
Seeing the core itself
The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.
Developers: this page as JSON is GET /v1/data/norway/wells/81/cores/2, documented in the API reference.