What was run in 7318/12-2 and how the hole was built: the logs with their intervals, the casing strings with leak-off tests, and the mud at depth.
The table below says which logs were run and over what interval. The curves themselves are held in Diskos, Norway's national data repository; its public portal lists what has been released for a wellbore and can be ordered for an administrative fee. Diskos public portal →
Logs
| Log | Top, m | Base, m |
|---|---|---|
| MWD - TELEMWD measurement while drilling · TELE TeleScope telemetry | 56 | 508 |
| MWD - ARC TELEMWD measurement while drilling · ARC array resistivity compensated · TELE TeleScope telemetry | 325 | 833 |
| MWD - ARC TELE SONSCMWD measurement while drilling · ARC array resistivity compensated · TELE TeleScope telemetry | 383 | 835 |
| MWD - PD ARC TELE SONSCMWD measurement while drilling · ARC array resistivity compensated · TELE TeleScope telemetry | 691 | 3,057 |
| USIT PPC CBL GRUSIT ultrasonic imager (cement and casing) · PPC powered positioning caliper · CBL cement bond log · GR gamma ray | 1,360 | 3,047 |
| MWD - PD GVR NEO SONSC TELEMWD measurement while drilling · GVR geoVISION resistivity · TELE TeleScope telemetry | 3,057 | 3,476 |
| PPC PQ SATURN PO IFA SC MS GRPPC powered positioning caliper · IFA in-situ fluid analyzer · GR gamma ray | 3,230 | 3,522 |
Casing and leak-off tests
| Casing | Diameter, in | Depth, m | Hole, in | Hole depth, m | LOT/FIT, g/cm³ | Test |
|---|---|---|---|---|---|---|
| Conductor | 36 | 499 | 42 | 508 | 0 | — |
| Surf.cond. | 20 | 827 | 24 | 833 | 0 | — |
| Pilot hole | — | 835 | 8 1/2 | 835 | 0 | — |
| — | — | 838 | — | 0 | 1.27 | FIT |
| Interm. | 13 3/8 | 1,517.7 | 17 1/2 | 1,524 | 0 | — |
| — | — | 1,527 | — | 0 | 1.36 | FIT |
| Liner | 9 5/8 | 3,056 | 12 1/4 | 3,057 | 0 | — |
| — | — | 3,059 | — | 0 | 1.93 | FIT |
| Open hole | — | 3,535 | 8 1/2 | 3,535 | 0 | — |
Drilling mud
16 READINGS · BY DEPTH
| Depth, m | Weight, g/cm³ | Viscosity, mPa·s | Yield point, Pa | Type |
|---|---|---|---|---|
| 495 | 1.03 | 1 | 0 | -- |
| 833 | 1.03 | 1 | 0 | -- |
| 833 | 1.3 | 22 | 0 | -- |
| 838 | 1.1 | 14 | 0 | Ob |
| 1,238 | 1.14 | 18 | 0 | Ob |
| 1,524 | 1.22 | 16 | 0 | Ob |
| 1,524 | 1.14 | 18 | 0 | Ob |
| 1,740 | 1.22 | 14 | 0 | Ob |
| 2,017 | 1.2 | 15 | 0 | Ob |
| 2,898 | 1.2 | 15 | 0 | Ob |
| 3,126 | 1.22 | 16 | 0 | Ob |
| 3,241 | 1.21 | 15 | 0 | Ob |
| 3,354 | 1.22 | 15 | 0 | Ob |
| 3,525 | 1.14 | 13 | 0 | Ob |
| 3,525 | 1.22 | 17 | 0 | Ob |
| 3,535 | 1.03 | 1 | 0 | -- |
The words under each tool string are Petrora's reading of the standard codes in it; a code we do not recognize is left as filed. No composite log has been released for this well, so there is no file to open beside these runs.
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). Log names are the Directorate's tool strings as filed; the plain-word readings beside them are Petrora's, from common industry abbreviations. Depths are metres along the wellbore from the kelly bushing; diameters are inches, as filed.
Developers: this page as JSON is GET /v1/data/norway/wells/8106, documented in the API reference.