NORWAY · WELLBORES · NPDID 8126

7220/11-4

Exploration · Appraisal · P&A · Oil/gas · Lundin Norway AS · PL 609

1 document: reports, logs, and plots →

7220/11-4 was cored 7 times, 84.7 m in all between 1,904 and 1,991.8 m.

7
cores
84.7
metres cored in all
2
tests and fluid samples across the cores

SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE

Core log

DEPTHFORMATIONCOREPHOTOSTHINSEC.SLIDESTESTS1,9041,914.7Core 1, 1,904 to 1,914.7 m. Open the core.Core 110.7 m1 m not cored1,915.71,934Core 2, 1,915.7 to 1,934 m. Open the core.Core 218.3 m1,941.8Core 3, 1,934 to 1,941.8 m. Open the core.Core 37.8 m1,960.2Ørn Fm, 1,956 to 1,960.2 mØrn FmCore 4, 1,942 to 1,960.2 m. Open the core.Core 418.2 m1,970.4Ørn Fm, 1,960.2 to 1,970.4 mØrn FmCore 5, 1,960.2 to 1,970.4 m. Open the core.Core 510.2 m2.2 m not cored1,972.61,990.8Ørn Fm, 1,972.6 to 1,990.8 mØrn FmCore 6, 1,972.6 to 1,990.8 m. Open the core.Core 618.2 m1,991.8 mØrn Fm, 1,990.6 to 1,991.8 mØrn FmCore 7, 1,990.6 to 1,991.8 m. Open the core.Core 7

Core by core

CoreTopBaseLengthInPhotosThin sectionsSlides from coreTestsSample available
Core 1 →1,904 m1,914.7 m10.7—————Yes
Core 2 →1,915.7 m1,934 m18.3————1Yes
Core 3 →1,934 m1,941.8 m7.8————1Yes
Core 4 →1,942 m1,960.2 m18.2Ørn Fm————Yes
Core 5 →1,960.2 m1,970.4 m10.2Ørn Fm————Yes
Core 6 →1,972.6 m1,990.8 m18.2Ørn Fm————Yes
Core 7 →1,990.6 m1,991.8 m1.2Ørn Fm————Yes

Seeing the cores themselves

The cores are held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files each core as an interval and nothing against it. The log places everything else on file for the wellbore inside the core whose interval contains its depth: photographs by the interval in their title, thin sections and slides by their depth, tests by overlap, formations by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge of a core can belong to its neighbor. Only slides made from core are shown; slides from cuttings at the same depths are on the Samples tab.

Developers: this page as JSON is GET /v1/data/norway/wells/8126/cores, documented in the API reference.