NORWAY · WELLBORES · NPDID 8213

31/7-2 A

Exploration · Appraisal · P&A · Oil/gas · Faroe Petroleum Norge AS · Bestla · PL 740

1 document: reports, logs, and plots →

Core 2

Core 2 of 31/7-2 A was cut from 2,628 to 2,655.8 m, 27.8 m in the Sognefjord Fm. The Directorate lists core samples from it as available.

27.8
m cored · 2,628 to 2,655.8
5
log runs across it

SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE

Down the core

TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS

DEPTHFORMATIONCOREPHOTOSTHINSEC.SLIDESTESTS2,6282,655.8 m2,6302,6352,6402,6452,650Sognefjord Fm, 2,628 to 2,655.8 mSognefjord FmCore 2, 2,628 to 2,655.8 mCore 227.8 m

The Directorate has no photographs, thin sections, core-derived slides, or tests on file inside this core's interval. The well's core reports, where there are any, are below.

What it was cut through

UnitFrom, mTo, mCore in it, m
Sognefjord Fm2,6282,655.827.8

Every formation top in 31/7-2 A →

Logs run across it

5 RUNS COVERING PART OF THE INTERVAL

  • VSP GRvertical seismic profile · gamma ray900 to 2,713 m
  • QGEO MSIPmodular sonic imaging platform (Sonic Scanner)2,494 to 2,723 m
  • ZAIT ADT PEX CMR GR ECRDPlatform Express (resistivity, density, neutron) · combinable magnetic resonance · gamma ray2,494 to 2,723 m
  • LWD - GR RES SON DEN NEUlogging while drilling · gamma ray · resistivity · sonic · density · neutron2,496 to 2,723 m
  • MDT GRmodular formation dynamics tester · gamma ray2,505 to 2,648 m

Logs, casing, and the files you can open →

Seeing the core itself

The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.

Developers: this page as JSON is GET /v1/data/norway/wells/8213/cores/2, documented in the API reference.