NORWAY · WELLBORES · NPDID 8239
7324/8-3
Exploration · Appraisal · P&A · Oil · OMV (Norge) AS · PL 537
Core 2
Core 2 of 7324/8-3 was cut from 674.9 to 706 m, 31.2 m in the Stø Fm and Fruholmen Fm. The Directorate lists core samples from it as available.
- 31.2
- m cored · 674.9 to 706
- 1
- formation boundary crossed
- 5
- log runs across it
SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE
Down the core
TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS
The Directorate has no photographs, thin sections, core-derived slides, or tests on file inside this core's interval. The well's core reports, where there are any, are below.
What it was cut through
| Unit | From, m | To, m | Core in it, m |
|---|---|---|---|
| Stø Fm | 674.9 | 688 | 13.1 |
| Fruholmen Fm | 688 | 706 | 18 |
Logs run across it
5 RUNS COVERING PART OF THE INTERVAL
- HRLA PEX APS HNGS GRhigh-resolution laterolog array · Platform Express (resistivity, density, neutron) · accelerator porosity sonde · spectral gamma ray (hostile environment) · gamma ray600 to 800 m
- CMR MDT GRcombinable magnetic resonance · modular formation dynamics tester · gamma ray628 to 799 m
- LWD - GVR ARC TELElogging while drilling · geoVISION resistivity · array resistivity compensated · TeleScope telemetry645 to 805 m
- FMI MSIP GRformation micro-imager · modular sonic imaging platform (Sonic Scanner) · gamma ray662 to 800 m
- MDT GRmodular formation dynamics tester · gamma ray671 to 740 m
Seeing the core itself
The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.
Developers: this page as JSON is GET /v1/data/norway/wells/8239/cores/2, documented in the API reference.