NORWAY · WELLBORES · NPDID 8307
7219/12-3 S
Exploration · Wildcat · P&A · Shows · Lundin Norway AS · PL 533
What was run in 7219/12-3 S and how the hole was built: the logs with their intervals, the casing strings with leak-off tests, and the mud at depth.
The table below says which logs were run and over what interval. The curves themselves are held in Diskos, Norway's national data repository; its public portal lists what has been released for a wellbore and can be ordered for an administrative fee. Diskos public portal →
Logs
| Log | Top, m | Base, m |
|---|---|---|
| MWD LWD - GR PWD DIRMWD measurement while drilling · LWD logging while drilling · GR gamma ray · PWD pressure while drilling · DIR directional survey | 337 | 390 |
| MWD LWD - GR RES PWD DIRMWD measurement while drilling · LWD logging while drilling · GR gamma ray · RES resistivity · PWD pressure while drilling · DIR directional survey | 380 | 644 |
| MWD LWD - GR RES AC PWD DIRMWD measurement while drilling · LWD logging while drilling · GR gamma ray · RES resistivity · AC acoustic (sonic) · PWD pressure while drilling · DIR directional survey | 387 | 496 |
| ZO VSPVSP vertical seismic profile | 616 | 2,735 |
| MWD LWD - RES GR DEN NEU CAL ACMWD measurement while drilling · LWD logging while drilling · RES resistivity · GR gamma ray · DEN density · NEU neutron · CAL caliper · AC acoustic (sonic) | 621 | 2,750 |
| FMI PPC MSIP PPC GR JARFMI formation micro-imager · PPC powered positioning caliper · MSIP modular sonic imaging platform (Sonic Scanner) · GR gamma ray | 1,755 | 2,749 |
| XPT HRLA PEX ECS HNGS GR JARXPT formation pressure tester (PressureXpress) · HRLA high-resolution laterolog array · PEX Platform Express (resistivity, density, neutron) · ECS elemental capture spectroscopy · HNGS spectral gamma ray (hostile environment) · GR gamma ray | 1,755 | 2,737 |
| MSCT GRMSCT mechanical sidewall coring tool · GR gamma ray | 1,799 | 2,730 |
| MDT GRMDT modular formation dynamics tester · GR gamma ray | 1,842 | 1,975 |
Casing and leak-off tests
| Casing | Diameter, in | Depth, m | Hole, in | Hole depth, m | LOT/FIT, g/cm³ | Test |
|---|---|---|---|---|---|---|
| Conductor | 30 | 402.8 | 36 | 404 | 0 | — |
| Pilot hole | — | 499 | 9 7/8 | 499 | 0 | — |
| Surf.cond. | 20 | 653.8 | 26 | 661 | 1.48 | LOT |
| Interm. | 9 5/8 | 1,755.9 | 12 1/4 | 1,763 | 1.52 | LOT |
| Open hole | — | 2,750 | 8 1/2 | 2,750 | 0 | — |
Drilling mud
24 READINGS · BY DEPTH
| Depth, m | Weight, g/cm³ | Viscosity, mPa·s | Yield point, Pa | Type |
|---|---|---|---|---|
| 380 | 1.5 | 17 | 0 | Kcl/polymer/gem |
| 402 | 1.5 | 17 | 0 | Kcl/polymer/gem |
| 402.8 | 1.05 | 1 | 0 | Bentonite spud mud |
| 402.8 | 1.3 | 16 | 0 | Kcl/polymer/gem |
| 420 | 1.3 | 14 | 0 | Kcl/polymer/gem |
| 503 | 1.03 | 1 | 0 | Other |
| 547 | 1.3 | 20 | 0 | Kcl/polymer/gem |
| 610 | 1.24 | 19 | 0 | Performadril |
| 625 | 1.3 | 21 | 0 | Kcl/polymer/gem |
| 661 | 1.3 | 14 | 0 | Kcl/polymer/gem |
| 661 | 1.39 | 20 | 0 | Kcl/polymer/gem |
| 661 | 1.2 | 17 | 0 | Performadril |
| 808 | 1.2 | 18 | 0 | Performadril |
| 961 | 1.24 | 21 | 0 | Performadril |
| 1,556 | 1.22 | 19 | 0 | Performadril |
| 1,556 | 1.24 | 19 | 0 | Performadril |
| 1,756 | 1.21 | 17 | 0 | Performadril |
| 1,763 | 1.24 | 19 | 0 | Performadril |
| 2,402 | 1.23 | 24 | 0 | Performadril |
| 2,448 | 1.24 | 23 | 0 | Performadril |
| 2,517 | 1.23 | 24 | 0 | Performadril |
| 2,655 | 1.21 | 23 | 0 | Performadril |
| 2,740 | 1.22 | 21 | 0 | Performadril |
| 2,750 | 1.21 | 22 | 0 | Performadril |
The words under each tool string are Petrora's reading of the standard codes in it; a code we do not recognize is left as filed. No composite log has been released for this well, so there is no file to open beside these runs.
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). Log names are the Directorate's tool strings as filed; the plain-word readings beside them are Petrora's, from common industry abbreviations. Depths are metres along the wellbore from the kelly bushing; diameters are inches, as filed.
Developers: this page as JSON is GET /v1/data/norway/wells/8307, documented in the API reference.