NORWAY · WELLBORES · NPDID 8312

7219/12-2 A

Exploration · Wildcat · P&A · Dry · Lundin Norway AS · PL 533

1 document: reports, logs, and plots →

Core 1

Core 1 of 7219/12-2 A was cut from 1,622 to 1,675.2 m, 53.2 m in the Stø Fm. The Directorate lists core samples from it as available.

53.2
m cored · 1,622 to 1,675.2
3
log runs across it

SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE

Down the core

TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS

DEPTHFORMATIONCOREPHOTOSTHINSEC.SLIDESTESTS1,6221,675.2 m1,6301,6401,6501,6601,670Stø Fm, 1,622 to 1,675.2 mStø FmCore 1, 1,622 to 1,675.2 mCore 153.2 m

The Directorate has no photographs, thin sections, core-derived slides, or tests on file inside this core's interval. The well's core reports, where there are any, are below.

What it was cut through

UnitFrom, mTo, mCore in it, m
Stø Fm1,6221,675.253.2

Every formation top in 7219/12-2 A →

Logs run across it

3 RUNS COVERING PART OF THE INTERVAL

  • FMI MSIPformation micro-imager · modular sonic imaging platform (Sonic Scanner)1,233 to 1,903 m
  • XPT HRLA PEX HNGS ECSformation pressure tester (PressureXpress) · high-resolution laterolog array · Platform Express (resistivity, density, neutron) · spectral gamma ray (hostile environment) · elemental capture spectroscopy1,534 to 1,898 m
  • LWD - RES GR PWD CAL DEN NEU AClogging while drilling · resistivity · gamma ray · pressure while drilling · caliper · density · neutron · acoustic (sonic)1,675 to 1,903 m

Logs, casing, and the files you can open →

Seeing the core itself

The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.

Developers: this page as JSON is GET /v1/data/norway/wells/8312/cores/1, documented in the API reference.