NORWAY · WELLBORES · NPDID 8317
6506/11-10
Exploration · Wildcat · P&A · Gas/condensate · OMV (Norge) AS · Berling · PL 644 B
Core 1
Core 1 of 6506/11-10 was cut from 3,942 to 3,967.8 m, 25.8 m in the Cromer Knoll Gp. The Directorate lists core samples from it as available.
- 25.8
- m cored · 3,942 to 3,967.8
- 6
- log runs across it
SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE
Down the core
TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS
The Directorate has no photographs, thin sections, core-derived slides, or tests on file inside this core's interval. The well's core reports, where there are any, are below.
What it was cut through
| Unit | From, m | To, m | Core in it, m |
|---|---|---|---|
| Cromer Knoll Gp | 3,942 | 3,967.8 | 25.8 |
Logs run across it
6 RUNS COVERING PART OF THE INTERVAL
- USIT CBL GRultrasonic imager (cement and casing) · cement bond log · gamma ray3,739 to 4,154 m
- MDT GRmodular formation dynamics tester · gamma ray3,810 to 4,051 m
- PPC APS CMR GRpowered positioning caliper · accelerator porosity sonde · combinable magnetic resonance · gamma ray3,810 to 4,165 m
- PPC MSIP PPC NGIT GRpowered positioning caliper · modular sonic imaging platform (Sonic Scanner) · gamma ray3,810 to 4,165 m
- QAIT HLDS ECS GRhostile litho-density sonde · elemental capture spectroscopy · gamma ray3,810 to 4,165 m
- LWD - ABG GT EWR SOL PWD DIRlogging while drilling · electromagnetic wave resistivity · pressure while drilling · directional survey3,817 to 4,230 m
Seeing the core itself
The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.
Developers: this page as JSON is GET /v1/data/norway/wells/8317/cores/1, documented in the API reference.