NORWAY · WELLBORES · NPDID 8317
6506/11-10
Exploration · Wildcat · P&A · Gas/condensate · OMV (Norge) AS · Berling · PL 644 B
Core 3
Core 3 of 6506/11-10 was cut from 4,313 to 4,331.3 m, 18.3 m in the Garn Fm. The Directorate lists core samples from it as available.
- 18.3
- m cored · 4,313 to 4,331.3
- 5
- log runs across it
SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE
Down the core
TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS
The Directorate has no photographs, thin sections, core-derived slides, or tests on file inside this core's interval. The well's core reports, where there are any, are below.
What it was cut through
| Unit | From, m | To, m | Core in it, m |
|---|---|---|---|
| Garn Fm | 4,313 | 4,331.3 | 18.3 |
Logs run across it
5 RUNS COVERING PART OF THE INTERVAL
- MDT GRmodular formation dynamics tester · gamma ray4,163 to 4,380 m
- ECS LDS CMR GRelemental capture spectroscopy · litho-density sonde · combinable magnetic resonance · gamma ray4,165 to 4,530 m
- QAIT APS PPC MSIP GRaccelerator porosity sonde · powered positioning caliper · modular sonic imaging platform (Sonic Scanner) · gamma ray4,165 to 4,538 m
- MSCT GRmechanical sidewall coring tool · gamma ray4,224 to 4,380 m
- LWD - DGR SOL EWR P4 ALD CTN PWDlogging while drilling · dual gamma ray · electromagnetic wave resistivity · azimuthal litho-density · compensated thermal neutron · pressure while drilling4,230 to 4,536 m
Seeing the core itself
The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.
Developers: this page as JSON is GET /v1/data/norway/wells/8317/cores/3, documented in the API reference.