NORWAY · WELLBORES · NPDID 8335

34/2-5 S

Exploration · Wildcat · P&A · Dry · Aker BP ASA · PL 790

1 document: reports, logs, and plots →

34/2-5 S is a wildcat exploration wellbore in the North Sea, drilled by Aker BP ASA, entered Feb 28, 2018, to 3,680 m in the Lunde Fm.

On the map →

3,680
m total depth · 3,617 m vertical
389
m water depth
Feb 28, 2018
entered · completed Mar 31, 2018
Lunde Fm
at total depth · Late Triassic
—
m of core
—
°C bottom-hole temperature

SODIR FACTPAGES · RECORD UPDATED FEB 20, 2026 · RELEASED DEC 20, 2019

On file for this wellbore

What the Directorate holds from this wellbore. Each opens the section that lists it.

Drilling

Drilling facility
TRANSOCEAN ARCTIC · Semisub steel
Drilling days
32
Kelly bushing elevation
24 m
Maximum inclination
23.78000069°
Drilling permit
1684-L
Licensing round
TFO2014
Plugged and abandoned
—
Core samples available
Yes
Cuttings samples available
Yes
Position · ED50
61.75946° N, 2.58593° E

Well history

WRITTEN BY THE NORWEGIAN OFFSHORE DIRECTORATE

General

Well 34/2-5 S was drilled to test the Raudåsen prospect on Tampen Spur in the North Sea. The primary objective was to test the hydrocarbon potential in Late Triassic to Early Jurassic sandstones of the Statfjord Group and Lunde Formation.

Operations and results

Wildcat well 34/2-5 S was spudded with the semi-submersible installation Transocean Arctic on 28 February 2018 and drilled to TD at 3680 m in the Late Triassic Lunde Formation. Operations proceeded without significant problems. The well was drilled with seawater and hi-vis pills down to 473.5 m, with bentonite/KCl mud from 473.5 to 906 m, with EMS 4600 oil-based mud from 906 m to 3389 m, and with WARP oil-based mud from 3389 m to TD.

Top Statfjord Group was penetrated from 3451 m (3387.8 m TVD) to top Lunde Formation at 3568 m (3504.8 m TVD) The whole of Statfjord and Lunde to TD consist of interbedded sandstone, siltstone and Claystone, with rare beds of Coal and carbonaceous Claystone in the Statfjord Formation. Net/gross reservoir is calculated to 0.61 in Statfjord and 0.44 in Lunde, with 19% average porosity for both. Pore pressure was measured on LWD stethoscope and showed water gradients in both Statfjord and Lunde, but with different pressure regimes in Statfjord and Lunde. There were no oil shows above the OBM in the well.

Due to dry well no cores were cut. No wire line logs were run, and no fluid sample was taken.

The well was permanently abandoned on 31 March 2018 as a dry well.

Testing

No drill stem test was performed.

Around this wellbore

This wellbore on Sodir FactPages → · Press release →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). Depths are metres along the wellbore from the kelly bushing unless a row gives its own unit; older cores are filed in feet. A zero the Directorate files for an unmeasured pressure, density, or temperature is shown as a dash.

Developers: this page as JSON is GET /v1/data/norway/wells/8335, documented in the API reference.