NORWAY · WELLBORES · NPDID 8397

35/9-14 A

Exploration · Appraisal · P&A · Shows · Spirit Energy Norge AS · PL 682

1 document: reports, logs, and plots →

What was run in 35/9-14 A and how the hole was built: the logs with their intervals, the casing strings with leak-off tests, and the mud at depth.

The table below says which logs were run and over what interval. The curves themselves are held in Diskos, Norway's national data repository; its public portal lists what has been released for a wellbore and can be ordered for an administrative fee. Diskos public portal →

Logs

LogTop, mBase, m
LWD - TELE ECO SONVIS SONSCOPELWD logging while drilling · TELE TeleScope telemetry · ECO EcoScope multifunction logging · SONVIS sonicVISION sonic1,4743,900
GR XL ROCKGR gamma ray3,6303,890
CMR MDT SAT IFACMR combinable magnetic resonance · MDT modular formation dynamics tester · IFA in-situ fluid analyzer3,7003,900

Casing and leak-off tests

CasingDiameter, inDepth, mHole, inHole depth, mLOT/FIT, g/cm³Test
Interm.13 3/81,47517 1/21,4791.4FIT
Liner9 5/83,465.212 1/43,4681.5FIT
Open hole—3,9008 1/23,9000—

Drilling mud

16 READINGS · BY DEPTH

Depth, mWeight, g/cm³Viscosity, mPa·sYield point, PaType
6701.1890Kcl/polymer/gem
1,4751.22170Innovert
1,9541.2160Innovert
2,8001.21180Innovert
2,8341.28230Innovert
3,0331.23200Innovert
3,3051.24200Innovert
3,3461.27210Innovert
3,4241.24200Innovert
3,4611.27220Innovert
3,4611.3230Innovert
3,4671.24180Innovert
3,4791.3240Innovert
3,4791.27220Innovert
3,4941.27120Innovert
3,9001.27220Innovert

The words under each tool string are Petrora's reading of the standard codes in it; a code we do not recognize is left as filed. No composite log has been released for this well, so there is no file to open beside these runs.

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). Log names are the Directorate's tool strings as filed; the plain-word readings beside them are Petrora's, from common industry abbreviations. Depths are metres along the wellbore from the kelly bushing; diameters are inches, as filed.

Developers: this page as JSON is GET /v1/data/norway/wells/8397, documented in the API reference.