NORWAY · WELLBORES · NPDID 8492

25/10-16 B

Exploration · Wildcat · P&A · Dry · Aker BP ASA · PL 028 B

1 document: reports, logs, and plots →

25/10-16 B is a wildcat exploration wellbore in the North Sea, drilled by Aker BP ASA, entered Aug 10, 2018, to 4,893 m in the Skagerrak Fm.

On the map →

4,893
m total depth · 2,648 m vertical
116.5
m water depth
Aug 10, 2018
entered · completed Aug 18, 2018
Skagerrak Fm
at total depth · Late Triassic
—
m of core
—
°C bottom-hole temperature

SODIR FACTPAGES · RECORD UPDATED FEB 20, 2026 · RELEASED AUG 18, 2020

On file for this wellbore

What the Directorate holds from this wellbore. Each opens the section that lists it.

Drilling

Drilling facility
MAERSK INTREPID · Jack-up 3 legs
Drilling days
9
Kelly bushing elevation
55 m
Maximum inclination
77.59999847°
Drilling permit
1708-L
Licensing round
TFO2017
Plugged and abandoned
Aug 18, 2018
Core samples available
Yes
Cuttings samples available
Yes
Position · ED50
59.03698° N, 2.22816° E

Well history

WRITTEN BY THE NORWEGIAN OFFSHORE DIRECTORATE

General

Well 25/10-16 B is a geological side-track to 25/10-16 A. It was drilled to test the Slengfehøgda prospect east of the Hanz Discovery in the North Sea. The primary objective was to test the hydrocarbon potential in sandstones in the Draupne and Hugin formations.

Operations and results

Wildcat well 25/10-16 B was kicked off at 2670 m in wellbore 25/10-16 A on 10 August 2018. It was drilled with the jack-up installation Mærsk Intrepid to TD at 4893 m (2648 m TVD) in the Late Triassic Skagerrak Formation. Mud losses and gains due to well breathing occurred in the Hugin and Heimdal formations, otherwise operations proceeded without significant problems. The well was drilled with RheGuard oil-based mud from kick-off to TD.

A total of 335 m MD thickness of Draupne Formation was drilled from 4484 m (2366.4 m TVD) to 4819 m (2587 m TVD. The Draupne Formation consisted of silty claystone with numerous thin limestones and only occasional, very thin, and water wet and/or calcite cemented lenses of sand. Top Hugin Formation was penetrated at 4821 m and was proven to be a continuous sand of approximately 8-9 m thickness with good reservoir quality, but water wet. Four pressure points were acquired in the Hugin Formation, all of which confirmed a ca 16 bar depleted reservoir compared to the 25/10-8 Hanz discovery well. No hydrocarbon shows above the OBM signature were recorded in the cuttings returned to surface.

No cores were cut. No fluid sample was taken.

The well was permanently abandoned on 18 August 2018 as a dry well.

Testing </s

Around this wellbore

This wellbore on Sodir FactPages → · Press release →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). Depths are metres along the wellbore from the kelly bushing unless a row gives its own unit; older cores are filed in feet. A zero the Directorate files for an unmeasured pressure, density, or temperature is shown as a dash.

Developers: this page as JSON is GET /v1/data/norway/wells/8492, documented in the API reference.