NORWAY · WELLBORES · NPDID 8562

6406/2-9 S

Exploration · Wildcat · P&A · Gas/condensate · Equinor Energy AS · PL 199

1 document: reports, logs, and plots →

Core 2

Core 2 of 6406/2-9 S was cut from 4,762 to 4,763.2 m, 1.2 m in the Tofte Fm. The Directorate lists core samples from it as available.

1.2
m cored · 4,762 to 4,763.2
7
log runs across it

SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE

Down the core

TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS

DEPTHFORMATIONCOREPHOTOSTHINSEC.SLIDESTESTS4,7624,763.2 mTofte Fm, 4,762 to 4,763.2 mTofte FmCore 2, 4,762 to 4,763.2 mCore 21.2 m

The Directorate has no photographs, thin sections, core-derived slides, or tests on file inside this core's interval. The well's core reports, where there are any, are below.

What it was cut through

UnitFrom, mTo, mCore in it, m
Tofte Fm4,7624,763.21.2

Every formation top in 6406/2-9 S →

Logs run across it

7 RUNS COVERING PART OF THE INTERVAL

  • VSI4versatile seismic imager2,427 to 4,795 m
  • QAIT SON SCAN QA GEOsonic4,330 to 4,988 m
  • APS HLDS ECS HNGS CMRaccelerator porosity sonde · hostile litho-density sonde · elemental capture spectroscopy · spectral gamma ray (hostile environment) · combinable magnetic resonance4,375 to 4,988 m
  • MSCTmechanical sidewall coring tool4,512 to 4,904 m
  • MDTmodular formation dynamics tester4,522 to 4,954 m
  • XLR4,721 to 4,827 m
  • MWD - ECO TELEmeasurement while drilling · EcoScope multifunction logging · TeleScope telemetry4,743 to 4,983 m

Logs, casing, and the files you can open →

Seeing the core itself

The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.

Developers: this page as JSON is GET /v1/data/norway/wells/8562/cores/2, documented in the API reference.