NORWAY · WELLBORES · NPDID 8580

6706/6-2 S

Exploration · Wildcat · P&A · Dry · Wintershall Norge AS · PL 847

1 document: reports, logs, and plots →

Core 3

Core 3 of 6706/6-2 S was cut from 3,678 to 3,705.8 m, 27.8 m in the Tang Fm. The Directorate lists core samples from it as available.

27.8
m cored · 3,678 to 3,705.8
3
palynology slides made from core
6
log runs across it

SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE

Down the core

TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS

DEPTHFORMATIONCOREPHOTOSTHINSEC.SLIDESTESTS3,6783,705.8 m3,6803,6853,6903,6953,700Tang Fm, 3,678 to 3,705.8 mTang FmCore 3, 3,678 to 3,705.8 mCore 327.8 m39.2 m not cored

What it was cut through

UnitFrom, mTo, mCore in it, m
Tang Fm3,6783,705.827.8

Every formation top in 6706/6-2 S →

Palynology slides made from core

3 IN THE INTERVAL

DepthLab codeIn
3,681.7 mPETROSTang Fm
3,684.5 mPETROSTang Fm
3,694.6 mPETROSTang Fm

Logs run across it

6 RUNS COVERING PART OF THE INTERVAL

  • CMR HNGS ADT NEXT APScombinable magnetic resonance · spectral gamma ray (hostile environment) · accelerator porosity sonde3,536 to 3,916 m
  • SS QGEO ZAIT3,536 to 3,916 m
  • PQ-XLD PO-ST PQ-QS HY PO-HP IFAin-situ fluid analyzer3,663 to 3,870 m
  • PQ-XLD PO-ST SAT PQ-QS HY PO IFAin-situ fluid analyzer3,663 to 3,737 m
  • LWD - CORElogging while drilling3,678 to 3,705 m
  • LWD - DIR GR RES DEN NEU PWD GEOlogging while drilling · directional survey · gamma ray · resistivity · density · neutron · pressure while drilling3,705 to 3,745 m

Logs, casing, and the files you can open →

Seeing the core itself

The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.

Developers: this page as JSON is GET /v1/data/norway/wells/8580/cores/3, documented in the API reference.