NORWAY · WELLBORES · NPDID 8608
7121/1-2 S
Exploration · Wildcat · P&A · Dry · Lundin Norway AS · PL 767
What was run in 7121/1-2 S and how the hole was built: the logs with their intervals, the casing strings with leak-off tests, and the mud at depth.
The table below says which logs were run and over what interval. The curves themselves are held in Diskos, Norway's national data repository; its public portal lists what has been released for a wellbore and can be ordered for an administrative fee. Diskos public portal →
Logs
| Log | Top, m | Base, m |
|---|---|---|
| HRLA NEXT PEX HNGS XPTHRLA high-resolution laterolog array · PEX Platform Express (resistivity, density, neutron) · HNGS spectral gamma ray (hostile environment) · XPT formation pressure tester (PressureXpress) | 0 | 0 |
| FMI MSIP GRFMI formation micro-imager · MSIP modular sonic imaging platform (Sonic Scanner) · GR gamma ray | 340 | 2,798 |
| MWD - PWD GR DIRMWD measurement while drilling · PWD pressure while drilling · GR gamma ray · DIR directional survey | 340 | 808 |
| MWD - GR PWD RES DIR ACMWD measurement while drilling · GR gamma ray · PWD pressure while drilling · RES resistivity · DIR directional survey · AC acoustic (sonic) | 407 | 806 |
| VSPVSP vertical seismic profile | 530 | 3,370 |
| MWD- GR RES PWD DIR ACMWD measurement while drilling · GR gamma ray · RES resistivity · PWD pressure while drilling · DIR directional survey · AC acoustic (sonic) | 813 | 2,017 |
| MWD - GR RES PWD NEU DEN CAL ACMWD measurement while drilling · GR gamma ray · RES resistivity · PWD pressure while drilling · NEU neutron · DEN density · CAL caliper · AC acoustic (sonic) | 2,017 | 3,375 |
| XL ROCK | 2,033 | 3,374 |
| MDTMDT modular formation dynamics tester | 2,133 | 2,794 |
| HRLA NEXT PEX HNGSHRLA high-resolution laterolog array · PEX Platform Express (resistivity, density, neutron) · HNGS spectral gamma ray (hostile environment) | 2,376 | 3,378 |
| FMI MSIPFMI formation micro-imager · MSIP modular sonic imaging platform (Sonic Scanner) | 2,700 | 3,370 |
| MDTMDT modular formation dynamics tester | 2,789 | 2,825 |
| MDTMDT modular formation dynamics tester | 2,872 | 3,360 |
Casing and leak-off tests
| Casing | Diameter, in | Depth, m | Hole, in | Hole depth, m | LOT/FIT, g/cm³ | Test |
|---|---|---|---|---|---|---|
| Conductor | 30 | 406.8 | 36 | 407.1 | 0 | — |
| Surf.cond. | 20 | 800.7 | 26 | 808 | 1.3 | LOT |
| Pilot hole | — | 806 | 9 7/8 | 806 | 0 | — |
| Interm. | 9 5/8 | 2,009.2 | 12 1/4 | 2,017 | 1.58 | LOT |
| Open hole | — | 3,375 | 8 1/2 | 3,375 | 0 | — |
Drilling mud
19 READINGS · BY DEPTH
| Depth, m | Weight, g/cm³ | Viscosity, mPa·s | Yield point, Pa | Type |
|---|---|---|---|---|
| 381 | 1.05 | 20 | 0 | Bentonite spud mud |
| 381 | 1.5 | 10 | 0 | Kcl/gem |
| 407 | 1.05 | 29 | 0 | Bentonite spud mud |
| 407 | 1.5 | 10 | 0 | Kcl/gem |
| 550 | 1.05 | 34 | 0 | Bentonite spud mud |
| 550 | 1.39 | 12 | 0 | Displacement mud |
| 615 | 1.03 | 1 | 0 | Sea water |
| 730 | 1.2 | 15 | 0 | Hp wbm |
| 795 | 1.05 | 34 | 0 | Bentonite spud mud |
| 795 | 1.39 | 12 | 0 | Displacement mud |
| 808 | 1.05 | 34 | 0 | Bentonite spud mud |
| 813 | 1.2 | 21 | 0 | Hp wbm |
| 1,750 | 1.24 | 21 | 0 | Hp wbm |
| 2,000 | 1.2 | 16 | 0 | Hp wbm |
| 2,009 | 1.24 | 22 | 0 | Hp wbm |
| 2,017 | 1.24 | 15 | 0 | Hp wbm |
| 2,022 | 1.24 | 15 | 0 | Hp wbm |
| 2,819 | 1.24 | 18 | 0 | Hp wbm |
| 3,375 | 1.24 | 22 | 0 | Hp wbm |
The words under each tool string are Petrora's reading of the standard codes in it; a code we do not recognize is left as filed. No composite log has been released for this well, so there is no file to open beside these runs.
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). Log names are the Directorate's tool strings as filed; the plain-word readings beside them are Petrora's, from common industry abbreviations. Depths are metres along the wellbore from the kelly bushing; diameters are inches, as filed.
Developers: this page as JSON is GET /v1/data/norway/wells/8608, documented in the API reference.