NORWAY · WELLBORES · NPDID 8616
31/7-3 S
Exploration · Appraisal · P&A · Dry · Faroe Petroleum Norge AS · Bestla · PL 740
What was run in 31/7-3 S and how the hole was built: the logs with their intervals, the casing strings with leak-off tests, and the mud at depth.
The table below says which logs were run and over what interval. The curves themselves are held in Diskos, Norway's national data repository; its public portal lists what has been released for a wellbore and can be ordered for an administrative fee. Diskos public portal →
Logs
| Log | Top, m | Base, m |
|---|---|---|
| LWD - DIRLWD logging while drilling · DIR directional survey | 148 | 213 |
| LWD - APWD RES GR DIRLWD logging while drilling · APWD annular pressure while drilling · RES resistivity · GR gamma ray · DIR directional survey | 213 | 912 |
| GR DIR APWD RES SON DEN NEUGR gamma ray · DIR directional survey · APWD annular pressure while drilling · RES resistivity · SON sonic · DEN density · NEU neutron | 912 | 2,498 |
| LWD - GR DIR PWD RES DEN NEU SONLWD logging while drilling · GR gamma ray · DIR directional survey · PWD pressure while drilling · RES resistivity · DEN density · NEU neutron · SON sonic | 2,498 | 2,705 |
| ZAIT PEX PPC MSIP NGI XPTPEX Platform Express (resistivity, density, neutron) · PPC powered positioning caliper · MSIP modular sonic imaging platform (Sonic Scanner) · XPT formation pressure tester (PressureXpress) | 2,498 | 2,705 |
| MSCT SGTMSCT mechanical sidewall coring tool | 2,623 | 2,696 |
Casing and leak-off tests
| Casing | Diameter, in | Depth, m | Hole, in | Hole depth, m | LOT/FIT, g/cm³ | Test |
|---|---|---|---|---|---|---|
| Conductor | 30 | 213.5 | 36 | 213.5 | 0 | — |
| Interm. | 13 3/8 | 906 | 17 1/2 | 912 | 1.62 | LOT |
| Interm. | 9 5/8 | 2,491.7 | 12 1/4 | 2,498 | 1.85 | FIT |
| Open hole | — | 2,705 | 8 1/2 | 2,705 | 0 | — |
Drilling mud
14 READINGS · BY DEPTH
| Depth, m | Weight, g/cm³ | Viscosity, mPa·s | Yield point, Pa | Type |
|---|---|---|---|---|
| 179 | 1.49 | 8 | 0 | Displace/kill mud |
| 815 | 1.43 | 30 | 0 | Innovert |
| 815 | 1.41 | 30 | 0 | Innovert |
| 912 | 1.02 | 1 | 0 | seawater |
| 912 | 1.24 | 6 | 0 | Displace/kill mud |
| 1,205 | 1.51 | 26 | 0 | Innovert |
| 1,371 | 1.52 | 33 | 0 | Innovert |
| 1,432 | 1.51 | 32 | 0 | Innovert |
| 2,360 | 1.51 | 30 | 0 | Innovert |
| 2,360 | 1.25 | 16 | 0 | Innovert |
| 2,500 | 1.24 | 15 | 0 | Innovert |
| 2,565 | 1.24 | 15 | 0 | Innovert obm |
| 2,705 | 1.25 | 16 | 0 | Innovert |
| 2,705 | 1.24 | 16 | 0 | Innovert |
The words under each tool string are Petrora's reading of the standard codes in it; a code we do not recognize is left as filed. No composite log has been released for this well, so there is no file to open beside these runs.
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). Log names are the Directorate's tool strings as filed; the plain-word readings beside them are Petrora's, from common industry abbreviations. Depths are metres along the wellbore from the kelly bushing; diameters are inches, as filed.
Developers: this page as JSON is GET /v1/data/norway/wells/8616, documented in the API reference.