NORWAY · WELLBORES · NPDID 8720

6507/3-13

Exploration · Wildcat · P&A · Oil/gas · Equinor Energy AS · PL 159 B

1 document: reports, logs, and plots →

Core 1

Core 1 of 6507/3-13 was cut from 2,840 to 2,886 m, 46 m in the Lysing Fm and Lange Fm. The Directorate lists core samples from it as available.

46
m cored · 2,840 to 2,886
1
formation boundary crossed
6
log runs across it

SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE

Down the core

TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS

DEPTHFORMATIONCOREPHOTOSTHINSEC.SLIDESTESTS2,8402,886 m2,8502,8602,8702,880Lysing Fm, 2,840 to 2,859 mLysing FmLange Fm, 2,859 to 2,886 mLange FmCore 1, 2,840 to 2,886 mCore 146 m372.9 m not cored

The Directorate has no photographs, thin sections, core-derived slides, or tests on file inside this core's interval. The well's core reports, where there are any, are below.

What it was cut through

UnitFrom, mTo, mCore in it, m
Lysing Fm2,8402,85919
Lange Fm2,8592,88627

Every formation top in 6507/3-13 →

Logs run across it

6 RUNS COVERING PART OF THE INTERVAL

  • VSI4versatile seismic imager368 to 3,409 m
  • XPT PEX CMRformation pressure tester (PressureXpress) · Platform Express (resistivity, density, neutron) · combinable magnetic resonance2,690 to 3,420 m
  • ZAIT MSIP NEXT PEXmodular sonic imaging platform (Sonic Scanner) · Platform Express (resistivity, density, neutron)2,690 to 3,420 m
  • MWD - DGR ADR AGR PWD PCDCmeasurement while drilling · dual gamma ray · pressure while drilling2,746 to 3,420 m
  • MDT CMRmodular formation dynamics tester · combinable magnetic resonance2,810 to 3,360 m
  • XLR2,834 to 3,279 m

Logs, casing, and the files you can open →

Seeing the core itself

The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.

Developers: this page as JSON is GET /v1/data/norway/wells/8720/cores/1, documented in the API reference.