NORWAY · WELLBORES · NPDID 8759
6506/11-11 S
Exploration · Appraisal · P&A · Gas · OMV (Norge) AS · Berling · PL 644
What was run in 6506/11-11 S and how the hole was built: the logs with their intervals, the casing strings with leak-off tests, and the mud at depth.
The table below says which logs were run and over what interval. The curves themselves are held in Diskos, Norway's national data repository; its public portal lists what has been released for a wellbore and can be ordered for an administrative fee. Diskos public portal →
Logs
| Log | Top, m | Base, m |
|---|---|---|
| VSI4 ZOVSPVSI4 versatile seismic imager · ZOVSP zero-offset vertical seismic profile | 388 | 4,423 |
| LWD - EWR4 DGR XBATLWD logging while drilling · DGR dual gamma ray · XBAT azimuthal sonic | 409 | 2,625 |
| IS CBL VDL GRCBL cement bond log · VDL variable density log · GR gamma ray | 2,610 | 3,410 |
| IS CBL VDL GR LINERCBL cement bond log · VDL variable density log · GR gamma ray | 2,610 | 3,410 |
| LWD - ABG EWR4 DGR XBATLWD logging while drilling · DGR dual gamma ray · XBAT azimuthal sonic | 2,625 | 3,827 |
| QAIT EMS PPC MSIP QGEO GREMS environmental measurement sonde · PPC powered positioning caliper · MSIP modular sonic imaging platform (Sonic Scanner) · GR gamma ray | 3,819 | 4,441 |
| XHPT APS LDS ECS HNGS CMR GRAPS accelerator porosity sonde · LDS litho-density sonde · ECS elemental capture spectroscopy · HNGS spectral gamma ray (hostile environment) · CMR combinable magnetic resonance · GR gamma ray | 3,819 | 4,441 |
| LWD - ALD CTN EWR GMLWD logging while drilling · ALD azimuthal litho-density · CTN compensated thermal neutron · EWR electromagnetic wave resistivity | 3,827 | 4,443 |
| XLR | 3,915 | 4,203 |
| MDTMDT modular formation dynamics tester | 4,142 | 4,274 |
| HXPT GRGR gamma ray | 4,212 | 4,326 |
| XLR | 4,233 | 4,273 |
Casing and leak-off tests
| Casing | Diameter, in | Depth, m | Hole, in | Hole depth, m | LOT/FIT, g/cm³ | Test |
|---|---|---|---|---|---|---|
| Conductor | 30 | 470 | 36 | 470 | 0 | — |
| Surf.cond. | 20 | 1,420 | 26 | 1,420 | 1.68 | FIT |
| Interm. | 13 3/8 | 2,618 | 17 1/2 | 2,619 | 1.98 | LOT |
| Interm. | 9 5/8 | 3,810 | 12 1/4 | 3,820 | 2.15 | FIT |
| Liner | 7 | 4,432 | 8 1/2 | 4,433 | 0 | — |
Drilling mud
29 READINGS · BY DEPTH
| Depth, m | Weight, g/cm³ | Viscosity, mPa·s | Yield point, Pa | Type |
|---|---|---|---|---|
| 46 | 1.49 | 25 | 0 | 1.5sg spud / kill mud |
| 110 | 1.49 | 35 | 0 | 1.5sg spud mud |
| 110 | 1.29 | 12 | 0 | Kcl polymer |
| 509 | 1.34 | 15 | 0 | Kcl polymer |
| 613 | 1.3 | 13 | 0 | Kcl polymer |
| 953 | 1.39 | 16 | 0 | Kcl polymer |
| 1,033 | 1.29 | 12 | 0 | Kcl polymer |
| 1,314 | 1.39 | 13 | 0 | Kcl polymer |
| 1,426 | 1.39 | 13 | 0 | Kcl polymer |
| 1,426 | 1.44 | 39 | 0 | Glydril wbm |
| 2,040 | 1.62 | 38 | 0 | Glydril wbm |
| 2,625 | 1.62 | 38 | 0 | Glydril wbm |
| 2,628 | 1.66 | 23 | 0 | Rheguard obm |
| 2,628 | 1.64 | 45 | 0 | Rheguard obm |
| 3,030 | 1.66 | 50 | 0 | Rheguard obm |
| 3,762 | 1.76 | 72 | 0 | Rheguard obm |
| 3,827 | 1.76 | 55 | 0 | Rheguard obm |
| 3,827 | 1.84 | 24 | 0 | Rheguard obm |
| 3,897 | 1.85 | 27 | 0 | Rheguard obm |
| 4,050 | 1.85 | 32 | 0 | Rheguard obm |
| 4,136 | 1.96 | 42 | 0 | Rheguard obm |
| 4,150 | 1.96 | 43 | 0 | Rheguard obm |
| 4,150 | 1.9 | 35 | 0 | Rheguard obm |
| 4,442 | 1.68 | 0 | 0 | Cabr brine |
| 4,442 | 1.91 | 39 | 0 | Rheguard obm |
| 4,442 | 1.64 | 0 | 0 | Cabr2 brine |
| 4,443 | 1.91 | 46 | 0 | Rheguard obm |
| 4,443 | 1.14 | 0 | 0 | Nacl brine |
| 4,443 | 1.91 | 70 | 0 | 1.92 sg obm mw 50 |
The words under each tool string are Petrora's reading of the standard codes in it; a code we do not recognize is left as filed. No composite log has been released for this well, so there is no file to open beside these runs.
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). Log names are the Directorate's tool strings as filed; the plain-word readings beside them are Petrora's, from common industry abbreviations. Depths are metres along the wellbore from the kelly bushing; diameters are inches, as filed.
Developers: this page as JSON is GET /v1/data/norway/wells/8759, documented in the API reference.