31/2-9
Exploration · Appraisal · P&A · Oil/gas · A/S Norske Shell · Troll · PL 054
What was run in 31/2-9 and how the hole was built: the logs with their intervals, the casing strings with leak-off tests, and the mud at depth.
Logs you can open: composite and completion logs on file
- WDSS completion logpdf · 132 KB
- Completion Report and Completion logpdf · 7.9 MB
The table below says which logs were run and over what interval. The curves themselves are held in Diskos, Norway's national data repository; its public portal lists what has been released for a wellbore and can be ordered for an administrative fee. Diskos public portal →
Logs
| Log | Top, m | Base, m |
|---|---|---|
| ISF BHC GRISF induction spherically focused log · BHC borehole-compensated sonic · GR gamma ray | 350 | 812 |
| FDC CNL GR CALFDC compensated formation density · CNL compensated neutron log · GR gamma ray · CAL caliper | 450 | 814 |
| CBL VDLCBL cement bond log · VDL variable density log | 520 | 1,500 |
| WSTWST well seismic tool | 776 | 1,769 |
| LDT CNL GR CALLDT litho-density tool · CNL compensated neutron log · GR gamma ray · CAL caliper | 803 | 1,502 |
| ISF BHC GRISF induction spherically focused log · BHC borehole-compensated sonic · GR gamma ray | 808 | 1,406 |
| CSTCST sidewall core sample taker | 816 | 1,496 |
| ISF BHC GRISF induction spherically focused log · BHC borehole-compensated sonic · GR gamma ray | 1,406 | 1,501 |
| CSTCST sidewall core sample taker | 1,498 | 1,770 |
| DLL MSFLDLL dual laterolog · MSFL micro-spherically focused log | 1,498 | 1,767 |
| HDTHDT high-resolution dipmeter | 1,498 | 1,770 |
| ISF BHC GRISF induction spherically focused log · BHC borehole-compensated sonic · GR gamma ray | 1,498 | 1,769 |
| LDT CNL GR CALLDT litho-density tool · CNL compensated neutron log · GR gamma ray · CAL caliper | 1,498 | 1,770 |
| RFTRFT repeat formation tester | 1,550 | 1,752 |
Casing and leak-off tests
| Casing | Diameter, in | Depth, m | Hole, in | Hole depth, m | LOT/FIT, g/cm³ | Test |
|---|---|---|---|---|---|---|
| Conductor | 30 | 450 | 36 | 460 | 0 | LOT |
| Surf.cond. | 20 | 808 | 26 | 816 | 1.47 | LOT |
| Interm. | 13 3/8 | 1,498 | 17 1/2 | 1,509 | 1.54 | LOT |
| Open hole | — | 1,770 | 12 1/4 | 1,770 | 0 | LOT |
Drilling mud
5 READINGS · BY DEPTH
| Depth, m | Weight, g/cm³ | Viscosity, mPa·s | Yield point, Pa | Type |
|---|---|---|---|---|
| 480 | 1.05 | 0 | 0 | waterbased |
| 780 | 1.12 | 0 | 0 | waterbased |
| 990 | 1.28 | 0 | 0 | waterbased |
| 1,290 | 1.31 | 0 | 0 | waterbased |
| 1,750 | 1.18 | 0 | 0 | waterbased |
The words under each tool string are Petrora's reading of the standard codes in it; a code we do not recognize is left as filed. No composite log has been released for this well, so there is no file to open beside these runs.
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). Log names are the Directorate's tool strings as filed; the plain-word readings beside them are Petrora's, from common industry abbreviations. Depths are metres along the wellbore from the kelly bushing; diameters are inches, as filed.
Developers: this page as JSON is GET /v1/data/norway/wells/88, documented in the API reference.