NORWAY · WELLBORES · NPDID 8932
25/8-19 S
Exploration · Wildcat · P&A · Oil/gas · MOL Norge AS · PL 820 S
What was run in 25/8-19 S and how the hole was built: the logs with their intervals, the casing strings with leak-off tests, and the mud at depth.
The table below says which logs were run and over what interval. The curves themselves are held in Diskos, Norway's national data repository; its public portal lists what has been released for a wellbore and can be ordered for an administrative fee. Diskos public portal →
Logs
| Log | Top, m | Base, m |
|---|---|---|
| LWD - DIR PWD GR RESLWD logging while drilling · DIR directional survey · PWD pressure while drilling · GR gamma ray · RES resistivity | 149 | 1,015 |
| LWD - DIR PWD GR RES SONLWD logging while drilling · DIR directional survey · PWD pressure while drilling · GR gamma ray · RES resistivity · SON sonic | 149 | 1,015 |
| LWD - GR PWD DIR DEN NEU RES SONLWD logging while drilling · GR gamma ray · PWD pressure while drilling · DIR directional survey · DEN density · NEU neutron · RES resistivity · SON sonic | 1,015 | 2,675 |
| USIT CBLUSIT ultrasonic imager (cement and casing) · CBL cement bond log | 1,221 | 1,957 |
| MDTMDT modular formation dynamics tester | 2,001 | 2,670 |
| MSCTMSCT mechanical sidewall coring tool | 2,001 | 2,670 |
| NFXT CMRCMR combinable magnetic resonance | 2,001 | 2,670 |
| TLD HGNS PPC MAST PPCTLD three-detector lithology density · HGNS gamma ray and neutron sonde · PPC powered positioning caliper | 2,001 | 2,670 |
| XL ROCK | 2,001 | 270 |
| ZAIT NGI | 2,001 | 2,670 |
| MDT MINIDSTMDT modular formation dynamics tester | 2,032 | 2,666 |
| ZAIT MAST | 2,653 | 2,769 |
| TLD HGNSTLD three-detector lithology density · HGNS gamma ray and neutron sonde | 2,658 | 2,768 |
| UBI NGIUBI ultrasonic borehole imager | 2,668 | 2,760 |
| LWD - GR DIR PWD DEN NEU RES SONLWD logging while drilling · GR gamma ray · DIR directional survey · PWD pressure while drilling · DEN density · NEU neutron · RES resistivity · SON sonic | 2,675 | 2,760 |
| MSCTMSCT mechanical sidewall coring tool | 2,680 | 2,758 |
| MDT DPSMDT modular formation dynamics tester | 2,686 | 2,749 |
Casing and leak-off tests
| Casing | Diameter, in | Depth, m | Hole, in | Hole depth, m | LOT/FIT, g/cm³ | Test |
|---|---|---|---|---|---|---|
| Conductor | 30 | 215 | 36 | 215 | 0 | — |
| Surf.cond. | 20 | 1,009.5 | 26 | 1,009.5 | 1.74 | FIT |
| Interm. | 9 5/8 | 1,914.4 | 12 1/4 | 1,914 | 1.93 | LOT |
| Liner | 7 | 2,473 | 8 1/2 | 2,473 | 1.5 | FIT |
| Open hole | — | 2,545 | 6 | 2,545 | 0 | — |
The words under each tool string are Petrora's reading of the standard codes in it; a code we do not recognize is left as filed. No composite log has been released for this well, so there is no file to open beside these runs.
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). Log names are the Directorate's tool strings as filed; the plain-word readings beside them are Petrora's, from common industry abbreviations. Depths are metres along the wellbore from the kelly bushing; diameters are inches, as filed.
Developers: this page as JSON is GET /v1/data/norway/wells/8932, documented in the API reference.