NORWAY · WELLBORES · NPDID 9051

30/2-5 S

Exploration · Wildcat · P&A · Gas/condensate · Equinor Energy AS · PL 878

Core 2

Core 2 of 30/2-5 S was cut from 4,240 to 4,244.6 m, 4.6 m in the Ness Fm. The Directorate lists core samples from it as available.

4.6
m cored · 4,240 to 4,244.6
7
log runs across it

SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE

Down the core

TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS

DEPTHFORMATIONCOREPHOTOSTHINSEC.SLIDESTESTS4,2404,244.6 m4,242Ness Fm, 4,240 to 4,244.6 mNess FmCore 2, 4,240 to 4,244.6 mCore 24.6 m

The Directorate has no photographs, thin sections, core-derived slides, or tests on file inside this core's interval. The well's core reports, where there are any, are below.

What it was cut through

UnitFrom, mTo, mCore in it, m
Ness Fm4,2404,244.64.6

Every formation top in 30/2-5 S →

Logs run across it

7 RUNS COVERING PART OF THE INTERVAL

  • VSI4 GRversatile seismic imager · gamma ray915 to 4,390 m
  • QAIT NEXT HLDT APS HNGT HXPTaccelerator porosity sonde4,075 to 4,390 m
  • MSIP NGI PPCmodular sonic imaging platform (Sonic Scanner) · powered positioning caliper4,116 to 4,390 m
  • CMR GRcombinable magnetic resonance · gamma ray4,130 to 4,390 m
  • XLR GRgamma ray4,175 to 4,355 m
  • XLR GRgamma ray4,204 to 4,365 m
  • MDT GR MRMS SC IFAmodular formation dynamics tester · gamma ray · in-situ fluid analyzer4,244 to 4,330 m

Logs, casing, and the files you can open →

Seeing the core itself

The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.

Developers: this page as JSON is GET /v1/data/norway/wells/9051/cores/2, documented in the API reference.