NORWAY · WELLBORES · NPDID 9149

6507/5-10 S

Exploration · Wildcat · P&A · Oil · ConocoPhillips Skandinavia AS · PL 891

Core 2

Core 2 of 6507/5-10 S was cut from 1,855 to 1,863.5 m, 8.5 m in the Åre Fm. The Directorate lists core samples from it as available.

8.5
m cored · 1,855 to 1,863.5
6
log runs across it

SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE

Down the core

TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS

DEPTHFORMATIONCOREPHOTOSTHINSEC.SLIDESTESTS1,8551,863.5 m1,8561,8581,8601,862Åre Fm, 1,855 to 1,863.5 mÅre FmCore 2, 1,855 to 1,863.5 mCore 28.5 m0.5 m not cored

The Directorate has no photographs, thin sections, core-derived slides, or tests on file inside this core's interval. The well's core reports, where there are any, are below.

What it was cut through

UnitFrom, mTo, mCore in it, m
Åre Fm1,8551,863.58.5

Every formation top in 6507/5-10 S →

Logs run across it

6 RUNS COVERING PART OF THE INTERVAL

  • GR FMI MSIPgamma ray · formation micro-imager · modular sonic imaging platform (Sonic Scanner)433 to 2,216 m
  • GR HNGS TLD HRLSgamma ray · spectral gamma ray (hostile environment) · three-detector lithology density433 to 2,214 m
  • LWD - DIR GR RES PWD DEN NEUlogging while drilling · directional survey · gamma ray · resistivity · pressure while drilling · density · neutron1,780 to 2,214 m
  • XLR1,782 to 2,072 m
  • XLR1,784 to 2,063 m
  • XPT CMRformation pressure tester (PressureXpress) · combinable magnetic resonance1,805 to 2,087 m

Logs, casing, and the files you can open →

Seeing the core itself

The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.

Developers: this page as JSON is GET /v1/data/norway/wells/9149/cores/2, documented in the API reference.