NORWAY · WELLBORES · NPDID 9242
34/4-16 S
Exploration · Appraisal · Plugged · Oil · Neptune Energy Norge AS · PL 882
Core 2
Core 2 of 34/4-16 S was cut from 3,503.9 to 3,553.3 m, 49.5 m in the Rannoch Fm and Drake Fm. The Directorate lists core samples from it as available.
- 49.5
- m cored · 3,503.9 to 3,553.3
- 1
- formation boundary crossed
- 4
- log runs across it
SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE
Down the core
TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS
The Directorate has no photographs, thin sections, core-derived slides, or tests on file inside this core's interval. The well's core reports, where there are any, are below.
What it was cut through
| Unit | From, m | To, m | Core in it, m |
|---|---|---|---|
| Rannoch Fm | 3,503.9 | 3,553 | 49.2 |
| Drake Fm | 3,553 | 3,553.3 | 0.3 |
Logs run across it
4 RUNS COVERING PART OF THE INTERVAL
- AIT QGEO PPC MSIP PEX EMA JARarray induction tool · powered positioning caliper · modular sonic imaging platform (Sonic Scanner) · Platform Express (resistivity, density, neutron)335 to 3,605 m
- MDT JARmodular formation dynamics tester3,335 to 3,565 m
- NEXT HNGS CMR XPT EMA JARspectral gamma ray (hostile environment) · combinable magnetic resonance · formation pressure tester (PressureXpress)3,335 to 3,565 m
- LWD - PWD RES GR DI NE DN SON SVlogging while drilling · pressure while drilling · resistivity · gamma ray · sonic3,449 to 3,603 m
Seeing the core itself
The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.
Developers: this page as JSON is GET /v1/data/norway/wells/9242/cores/2, documented in the API reference.