NORWAY · WELLBORES · NPDID 9251

6507/4-2 S

Exploration · Wildcat · P&A · Oil/gas/condensate · Wintershall Dea Norge AS · Dvalin · PL 211

Core 2

Core 2 of 6507/4-2 S was cut from 4,274 to 4,282 m, 8 m in the Garn Fm. The Directorate lists core samples from it as available.

8
m cored · 4,274 to 4,282
7
log runs across it

SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE

Down the core

TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS

DEPTHFORMATIONCOREPHOTOSTHINSEC.SLIDESTESTS4,2744,282 m4,2764,2784,280Garn Fm, 4,274 to 4,282 mGarn FmCore 2, 4,274 to 4,282 mCore 28 m

The Directorate has no photographs, thin sections, core-derived slides, or tests on file inside this core's interval. The well's core reports, where there are any, are below.

What it was cut through

UnitFrom, mTo, mCore in it, m
Garn Fm4,2744,2828

Every formation top in 6507/4-2 S →

Logs run across it

7 RUNS COVERING PART OF THE INTERVAL

  • VSPvertical seismic profile911 to 4,355 m
  • QAIT PPC ADT APS HLDS HNGSpowered positioning caliper · accelerator porosity sonde · hostile litho-density sonde · spectral gamma ray (hostile environment)3,843 to 4,487 m
  • QGEO SS PPCpowered positioning caliper4,000 to 4,472 m
  • CMR XPT NEXTcombinable magnetic resonance · formation pressure tester (PressureXpress)4,236 to 4,455 m
  • SWCsidewall cores4,262.5 to 4,365 m
  • MDT TLCmodular formation dynamics tester · drillpipe-conveyed logging4,264 to 4,290 m
  • LWD - COREA2logging while drilling4,274 to 4,282 m

Logs, casing, and the files you can open →

Seeing the core itself

The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.

Developers: this page as JSON is GET /v1/data/norway/wells/9251/cores/2, documented in the API reference.