NORWAY · WELLBORES · NPDID 9273

6406/3-10 A

Exploration · Wildcat · P&A · Oil/gas · Wintershall Dea Norge AS · PL 836 S

Core 4

Core 4 of 6406/3-10 A was cut from 4,712 to 4,803 m, 91 m in the Ror Fm and Tilje Fm. The Directorate lists core samples from it as available.

91
m cored · 4,712 to 4,803
1
formation boundary crossed
9
log runs across it

SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE

Down the core

TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS

DEPTHFORMATIONCOREPHOTOSTHINSEC.SLIDESTESTS4,7124,803 m4,7204,7304,7404,7504,7604,7704,7804,790Ror Fm, 4,712 to 4,715.1 mRor FmTilje Fm, 4,715.1 to 4,803 mTilje FmCore 4, 4,712 to 4,803 mCore 491 m

The Directorate has no photographs, thin sections, core-derived slides, or tests on file inside this core's interval. The well's core reports, where there are any, are below.

What it was cut through

UnitFrom, mTo, mCore in it, m
Ror Fm4,7124,715.13.1
Tilje Fm4,715.14,80387.9

Every formation top in 6406/3-10 A →

Logs run across it

9 RUNS COVERING PART OF THE INTERVAL

  • VSI12 VIVSP WAversatile seismic imager2,158 to 4,734 m
  • QAIT ADT APS NEXT HLDS HNGSaccelerator porosity sonde · hostile litho-density sonde · spectral gamma ray (hostile environment)3,270 to 4,927 m
  • QGEO PPC MSIP PPCpowered positioning caliper · modular sonic imaging platform (Sonic Scanner)4,100 to 4,927 m
  • CMR HXPTcombinable magnetic resonance4,400 to 4,836 m
  • ORA4,409 to 4,790 m
  • MDTmodular formation dynamics tester4,419 to 4,796 m
  • MDTmodular formation dynamics tester4,576 to 5,190 m
  • CORE4,712 to 4,802 m
  • LWD - CORElogging while drilling4,802 to 4,874 m

Logs, casing, and the files you can open →

Seeing the core itself

The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.

Developers: this page as JSON is GET /v1/data/norway/wells/9273/cores/4, documented in the API reference.