NORWAY · WELLBORES · NPDID 93

31/2-13 S

Exploration · Appraisal · P&A · Oil/gas · A/S Norske Shell · Troll · PL 054

31 documents: reports, logs, and plots →

Core 2

Core 2 of 31/2-13 S was cut from 1,754 to 1,757 m, 3 m in the Sognefjord Fm. The Directorate lists core samples from it as available.

3
m cored · 1,754 to 1,757
6
log runs across it

SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE

Down the core

TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS

DEPTHFORMATIONCOREPHOTOSTHINSEC.SLIDESTESTS1,7541,757 mSognefjord Fm, 1,754 to 1,757 mSognefjord FmCore 2, 1,754 to 1,757 mCore 23 m15 m not cored

The Directorate has no photographs, thin sections, core-derived slides, or tests on file inside this core's interval. The well's core reports, where there are any, are below.

What it was cut through

UnitFrom, mTo, mCore in it, m
Sognefjord Fm1,7541,7573

Every formation top in 31/2-13 S →

Logs run across it

6 RUNS COVERING PART OF THE INTERVAL

  • VELOCITYvelocity (check-shot) survey455 to 2,006 m
  • CBL VDL GRcement bond log · variable density log · gamma ray1,450 to 1,968 m
  • DIL LSS GRdual induction log · long-spaced sonic · gamma ray1,699 to 2,006 m
  • LDL CNL GRlitho-density log · compensated neutron log · gamma ray1,699 to 2,007 m
  • NGSnatural gamma ray spectrometry1,699 to 2,007 m
  • RFT GR HPrepeat formation tester · gamma ray1,750 to 1,992 m

Logs, casing, and the files you can open →

Core and petrography reports on file for the well

Seeing the core itself

The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.

Developers: this page as JSON is GET /v1/data/norway/wells/93/cores/2, documented in the API reference.