31/2-13 S
Exploration · Appraisal · P&A · Oil/gas · A/S Norske Shell · Troll · PL 054
Core 5
Core 5 of 31/2-13 S was cut from 1,795 to 1,807 m, 12 m in the Sognefjord Fm. The Directorate lists core samples from it as available.
- 12
- m cored · 1,795 to 1,807
- 3
- photographs
- 2
- tests and fluid samples across it
- 7
- log runs across it
SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE
Down the core
TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS
Photographs of this core
3 PHOTOS · HOSTED BY THE NORWEGIAN OFFSHORE DIRECTORATE
What it was cut through
| Unit | From, m | To, m | Core in it, m |
|---|---|---|---|
| Sognefjord Fm | 1,795 | 1,807 | 12 |
Tests and fluid samples across it
- DST 11,801 to 1,807 mOil 540 Sm³/d · gas 144,180 Sm³/d
- DST 1 sample1,801 to 1,806 mOil · sample available: yes
Logs run across it
7 RUNS COVERING PART OF THE INTERVAL
- VELOCITYvelocity (check-shot) survey455 to 2,006 m
- CBL VDL GRcement bond log · variable density log · gamma ray1,450 to 1,968 m
- DIL LSS GRdual induction log · long-spaced sonic · gamma ray1,699 to 2,006 m
- LDL CNL GRlitho-density log · compensated neutron log · gamma ray1,699 to 2,007 m
- NGSnatural gamma ray spectrometry1,699 to 2,007 m
- RFT GR HPrepeat formation tester · gamma ray1,750 to 1,992 m
- RFTrepeat formation tester1,800 to 1,800 m
Core and petrography reports on file for the well
- Core description core 2-8pdf · 5.8 MB
- Special core analyis studypdf · 2.4 MB
- Special core analysis studypdf · 722 KB
Seeing the core itself
The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.
Developers: this page as JSON is GET /v1/data/norway/wells/93/cores/5, documented in the API reference.