NORWAY · WELLBORES · NPDID 9388

7122/6-3 S

Exploration · Wildcat · P&A · Oil/gas · Vår Energi AS · PL 901

Core 1

Core 1 of 7122/6-3 S was cut from 1,898 to 1,913.6 m, 15.6 m in the Stø Fm, Nordmela Fm, and Tubåen Fm. The Directorate lists core samples from it as available.

15.6
m cored · 1,898 to 1,913.6
2
formation boundaries crossed
3
log runs across it

SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE

Down the core

TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS

DEPTHFORMATIONCOREPHOTOSTHINSEC.SLIDESTESTS1,8981,913.6 m1,9001,9021,9041,9061,9081,9101,912Stø Fm, 1,898 to 1,905 mStø FmNordmela Fm, 1,905 to 1,908 mNordmela FmTubåen Fm, 1,908 to 1,913.6 mTubåen FmCore 1, 1,898 to 1,913.6 mCore 115.6 m1.5 m not cored

The Directorate has no photographs, thin sections, core-derived slides, or tests on file inside this core's interval. The well's core reports, where there are any, are below.

What it was cut through

UnitFrom, mTo, mCore in it, m
Stø Fm1,8981,9057
Nordmela Fm1,9051,9083
Tubåen Fm1,9081,913.65.5

Every formation top in 7122/6-3 S →

Logs run across it

3 RUNS COVERING PART OF THE INTERVAL

  • XPT MAST HRLT PEX JARformation pressure tester (PressureXpress) · Platform Express (resistivity, density, neutron)1,796 to 1,995 m
  • LWD - CORE1logging while drilling1,898 to 1,915 m
  • MDT JARmodular formation dynamics tester1,920 to 1,899 m

Logs, casing, and the files you can open →

Seeing the core itself

The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.

Developers: this page as JSON is GET /v1/data/norway/wells/9388/cores/1, documented in the API reference.