NORWAY · WELLBORES · NPDID 94

15/12-1

Exploration · Wildcat · P&A · Oil shows · Den norske stats oljeselskap a.s · PL 038

5 documents: reports, logs, and plots →

Core 8

Core 8 of 15/12-1 was cut from 10,409 to 10,438 ft, 29 ft in the Sleipner Fm. The Directorate lists core samples from it as available.

29
ft cored · 10,409 to 10,438
2
palynology slides made from core
6
log runs across it

SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE · CORE FILED IN FEET, COMPARED AS 3,172.7 TO 3,181.5 M

Down the core

TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS

DEPTHFORMATIONCOREPHOTOSTHINSEC.SLIDESTESTS10,40910,438 ft10,41510,42010,42510,43010,435Sleipner Fm, 3,172.7 to 3,181.5 mSleipner FmCore 8, 10,409 to 10,438 ftCore 829 ft

What it was cut through

UnitFrom, mTo, mCore in it, m
Sleipner Fm3,172.73,181.58.8

Every formation top in 15/12-1 →

Palynology slides made from core

2 IN THE INTERVAL

DepthLab codeIn
10,426 ft—Sleipner Fm
10,437 ft—Sleipner Fm

2 more slides were made from cuttings or sidewall cores at depths inside this interval, not from the core itself. Every slide from the well →

Logs run across it

6 RUNS COVERING PART OF THE INTERVAL

  • BHC GR Cborehole-compensated sonic · gamma ray117 to 3,269 m
  • IESinduction electrical survey399 to 3,269 m
  • VSPvertical seismic profile548 to 3,266 m
  • CNL FDC GRcompensated neutron log · compensated formation density · gamma ray2,100 to 3,269 m
  • DIPMETER2,150 to 3,269 m
  • DLLdual laterolog2,871 to 3,262 m

Logs, casing, and the files you can open →

Seeing the core itself

The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.

Developers: this page as JSON is GET /v1/data/norway/wells/94/cores/8, documented in the API reference.