NORWAY · WELLBORES · NPDID 940
34/8-3
Exploration · Appraisal · P&A · Oil/gas · Norsk Hydro Produksjon AS · Visund · PL 120
Core 4
Core 4 of 34/8-3 was cut from 2,895 to 2,898.5 m, 3.5 m in the Etive Fm and Rannoch Fm. The Directorate lists core samples from it as available.
- 3.5
- m cored · 2,895 to 2,898.5
- 1
- formation boundary crossed
- 10
- log runs across it
SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE
Down the core
TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS
The Directorate has no photographs, thin sections, core-derived slides, or tests on file inside this core's interval. The well's core reports, where there are any, are below.
What it was cut through
| Unit | From, m | To, m | Core in it, m |
|---|---|---|---|
| Etive Fm | 2,895 | 2,897.2 | 2.2 |
| Rannoch Fm | 2,897.2 | 2,898.5 | 1.3 |
Logs run across it
10 RUNS COVERING PART OF THE INTERVAL
- VSPvertical seismic profile800 to 3,230 m
- DIL LSS GR SPdual induction log · long-spaced sonic · gamma ray · spontaneous potential1,090 to 3,328 m
- LDL CNLlitho-density log · compensated neutron log1,090 to 3,328 m
- CBL VDLcement bond log · variable density log1,200 to 3,232 m
- AMSauxiliary measurement sonde2,597 to 3,328 m
- DLL MSFLdual laterolog · micro-spherically focused log2,597 to 3,328 m
- NGSnatural gamma ray spectrometry2,597 to 3,328 m
- SHDTstratigraphic high-resolution dipmeter2,597 to 3,312 m
- CST GRsidewall core sample taker · gamma ray2,733 to 3,306 m
- RFTrepeat formation tester2,842 to 3,302 m
Seeing the core itself
The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.
Developers: this page as JSON is GET /v1/data/norway/wells/940/cores/4, documented in the API reference.