NORWAY · WELLBORES · NPDID 9404

35/10-7 A

Exploration · Appraisal · P&A · Oil · Equinor Energy AS · PL 630

Core 1

Core 1 of 35/10-7 A was cut from 3,391 to 3,427.8 m, 36.8 m in the Ness Fm. The Directorate lists core samples from it as available.

36.8
m cored · 3,391 to 3,427.8
4
log runs across it

SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE

Down the core

TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS

DEPTHFORMATIONCOREPHOTOSTHINSEC.SLIDESTESTS3,3913,427.8 m3,3953,4003,4053,4103,4153,4203,425Ness Fm, 3,391 to 3,427.8 mNess FmCore 1, 3,391 to 3,427.8 mCore 136.8 m

The Directorate has no photographs, thin sections, core-derived slides, or tests on file inside this core's interval. The well's core reports, where there are any, are below.

What it was cut through

UnitFrom, mTo, mCore in it, m
Ness Fm3,3913,427.836.8

Every formation top in 35/10-7 A →

Logs run across it

4 RUNS COVERING PART OF THE INTERVAL

  • MWD - GR RES PWDmeasurement while drilling · gamma ray · resistivity · pressure while drilling1,682 to 3,605 m
  • AIT PEX HNGS NEXTarray induction tool · Platform Express (resistivity, density, neutron) · spectral gamma ray (hostile environment)3,259 to 3,605 m
  • MDT CMRmodular formation dynamics tester · combinable magnetic resonance3,259 to 3,605 m
  • MSIP NGImodular sonic imaging platform (Sonic Scanner)3,259 to 3,605 m

Logs, casing, and the files you can open →

Seeing the core itself

The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.

Developers: this page as JSON is GET /v1/data/norway/wells/9404/cores/1, documented in the API reference.