NORWAY · WELLBORES · NPDID 9614

30/3-11 S

Exploration · Wildcat · P&A · Shows · Equinor Energy AS · PL 1104

Core 1

Core 1 of 30/3-11 S was cut from 4,404 to 4,414.8 m, 10.8 m in the Tarbert Fm. The Directorate lists core samples from it as available.

10.8
m cored · 4,404 to 4,414.8
4
palynology slides made from core
6
log runs across it

SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE

Down the core

TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS

DEPTHFORMATIONCOREPHOTOSTHINSEC.SLIDESTESTS4,4044,414.8 m4,4064,4084,4104,4124,414Tarbert Fm, 4,404 to 4,414.8 mTarbert FmCore 1, 4,404 to 4,414.8 mCore 110.8 m

What it was cut through

UnitFrom, mTo, mCore in it, m
Tarbert Fm4,4044,414.810.8

Every formation top in 30/3-11 S →

Palynology slides made from core

4 IN THE INTERVAL

DepthLab codeIn
4,404.1 mPETROSTRTarbert Fm
4,406.2 mPETROSTRTarbert Fm
4,409.1 mPETROSTRTarbert Fm
4,412.7 mPETROSTRTarbert Fm

Logs run across it

6 RUNS COVERING PART OF THE INTERVAL

  • CMR NEXTcombinable magnetic resonance4,380 to 4,643 m
  • QAIT APS HLDS HNGS JARaccelerator porosity sonde · hostile litho-density sonde · spectral gamma ray (hostile environment)4,380 to 4,645 m
  • MDT JARmodular formation dynamics tester4,385 to 4,646 m
  • MSIP HGImodular sonic imaging platform (Sonic Scanner)4,385 to 4,641 m
  • LWD - NBGR RES GR DIlogging while drilling · near-bit gamma ray · resistivity · gamma ray4,404 to 4,523 m
  • MDT GRmodular formation dynamics tester · gamma ray4,407 to 4,512 m

Logs, casing, and the files you can open →

Seeing the core itself

The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.

Developers: this page as JSON is GET /v1/data/norway/wells/9614/cores/1, documented in the API reference.