NORWAY · WELLBORES · NPDID 9619

31/4-A-13 C

Exploration · Wildcat · Plugged · Dry · Wintershall Dea Norge AS · PL 055

What was run in 31/4-A-13 C and how the hole was built: the logs with their intervals, the casing strings with leak-off tests, and the mud at depth.

The table below says which logs were run and over what interval. The curves themselves are held in Diskos, Norway's national data repository; its public portal lists what has been released for a wellbore and can be ordered for an administrative fee. Diskos public portal →

Logs

LogTop, mBase, m
LWD - GR DI PWD RESLWD logging while drilling · GR gamma ray · PWD pressure while drilling · RES resistivity1,1495,148
LWD - DI GR PWD RES DEN NEU CALLWD logging while drilling · GR gamma ray · PWD pressure while drilling · RES resistivity · DEN density · NEU neutron · CAL caliper5,1486,940
LWD - DI GR PWD RES DEN NEU CAL-LWD logging while drilling · GR gamma ray · PWD pressure while drilling · RES resistivity · DEN density · NEU neutron · CAL caliper6,9407,798
LWD - SON FPWD FSWD NMRLWD logging while drilling · SON sonic6,9407,798

Casing and leak-off tests

CasingDiameter, inDepth, mHole, inHole depth, mLOT/FIT, g/cm³Test
Interm.28283282830—
Interm.18 5/81,144.5241,1460—
Interm.13 3/83,948.617 1/23,9531.6FIT
Interm.10 3/45,145.613 1/25,1481.72FIT
Open hole—7,798.59 3/207,798.50—

Drilling mud

8 READINGS · BY DEPTH

Depth, mWeight, g/cm³Viscosity, mPa·sYield point, PaType
2,7711.55349Oil base
4,3421.52338.6Oil base
5,1451.524010.5Oil base
5,1451.17216.7Rheguard prime
5,1451.52349.1Oil base
5,4981.3276.2Oil base
7,3261.3265.7Oil base
7,7981.3276.2Oil base

The words under each tool string are Petrora's reading of the standard codes in it; a code we do not recognize is left as filed. No composite log has been released for this well, so there is no file to open beside these runs.

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). Log names are the Directorate's tool strings as filed; the plain-word readings beside them are Petrora's, from common industry abbreviations. Depths are metres along the wellbore from the kelly bushing; diameters are inches, as filed.

Developers: this page as JSON is GET /v1/data/norway/wells/9619, documented in the API reference.