NORWAY · WELLBORES · NPDID 9621
6306/3-2
Exploration · Wildcat · P&A · Shows · ConocoPhillips Skandinavia AS · PL 935
Core 2
Core 2 of 6306/3-2 was cut from 1,692.6 to 1,729 m, 36.4 m in the Rogn Fm. The Directorate lists core samples from it as available.
- 36.4
- m cored · 1,692.6 to 1,729
- 7
- log runs across it
SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE
Down the core
TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS
The Directorate has no photographs, thin sections, core-derived slides, or tests on file inside this core's interval. The well's core reports, where there are any, are below.
What it was cut through
| Unit | From, m | To, m | Core in it, m |
|---|---|---|---|
| Rogn Fm | 1,692.6 | 1,729 | 36.4 |
Logs run across it
7 RUNS COVERING PART OF THE INTERVAL
- FMI MSIPformation micro-imager · modular sonic imaging platform (Sonic Scanner)1,620 to 1,799 m
- HRLA PEX HNGShigh-resolution laterolog array · Platform Express (resistivity, density, neutron) · spectral gamma ray (hostile environment)1,620 to 1,799 m
- LWD - GR PWD RES DEN NEU SONlogging while drilling · gamma ray · pressure while drilling · resistivity · density · neutron · sonic1,620 to 1,799 m
- MDTmodular formation dynamics tester1,620 to 1,799 m
- VSPvertical seismic profile1,620 to 1,799 m
- XPT CMR NEXTformation pressure tester (PressureXpress) · combinable magnetic resonance1,620 to 1,799 m
- XLR1,631 to 1,792 m
Seeing the core itself
The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.
Developers: this page as JSON is GET /v1/data/norway/wells/9621/cores/2, documented in the API reference.