2/4-3
Exploration · Appraisal · P&A · Oil · Phillips Petroleum Company Norway · Ekofisk · PL 018
Core 2
Core 2 of 2/4-3 was cut from 10,220 to 10,225 ft, 5 ft in the Ekofisk Fm. The Directorate lists core samples from it as available.
- 5
- ft cored · 10,220 to 10,225
- 13
- log runs across it
SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE · CORE FILED IN FEET, COMPARED AS 3,115.1 TO 3,116.6 M
Down the core
TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS
The Directorate has no photographs, thin sections, core-derived slides, or tests on file inside this core's interval. The well's core reports, where there are any, are below.
What it was cut through
| Unit | From, m | To, m | Core in it, m |
|---|---|---|---|
| Ekofisk Fm | 3,115.1 | 3,116.6 | 1.5 |
Logs run across it
13 RUNS COVERING PART OF THE INTERVAL
- DIRdirectional survey607 to 3,430 m
- IESinduction electrical survey607 to 3,429 m
- VELOCITYvelocity (check-shot) survey607 to 3,426 m
- CDM610 to 3,429 m
- FDCcompensated formation density1,629 to 3,429 m
- SGR-Cspectral gamma ray1,629 to 3,426 m
- GRN2,942 to 3,372 m
- CBLcement bond log2,947 to 3,379 m
- VDLvariable density log2,988 to 3,384 m
- AA3,008 to 3,425 m
- LL-7laterolog3,008 to 3,429 m
- MLL-Cmicrolaterolog3,008 to 3,429 m
- SNPsidewall neutron porosity3,008 to 3,429 m
Core and petrography reports on file for the well
- 3(2X) Petrography Environment of Depositionpdf · 31.4 MB
Seeing the core itself
The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.
Developers: this page as JSON is GET /v1/data/norway/wells/97/cores/2, documented in the API reference.