2/4-3
Exploration · Appraisal · P&A · Oil · Phillips Petroleum Company Norway · Ekofisk · PL 018
Core 4
Core 4 of 2/4-3 was cut from 10,235 to 10,252 ft, 17 ft in the Ekofisk Fm. The Directorate lists core samples from it as available.
- 17
- ft cored · 10,235 to 10,252
- 2
- tests and fluid samples across it
- 13
- log runs across it
SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE · CORE FILED IN FEET, COMPARED AS 3,119.6 TO 3,124.8 M
Down the core
TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS
What it was cut through
| Unit | From, m | To, m | Core in it, m |
|---|---|---|---|
| Ekofisk Fm | 3,119.6 | 3,124.8 | 5.2 |
Tests and fluid samples across it
- DST 93,124 to 3,154 mOil 326 Sm³/d · gas 79,240 Sm³/d
- DST 103,124 to 3,224 mOil 595 Sm³/d · gas 132,925 Sm³/d
Logs run across it
13 RUNS COVERING PART OF THE INTERVAL
- DIRdirectional survey607 to 3,430 m
- IESinduction electrical survey607 to 3,429 m
- VELOCITYvelocity (check-shot) survey607 to 3,426 m
- CDM610 to 3,429 m
- FDCcompensated formation density1,629 to 3,429 m
- SGR-Cspectral gamma ray1,629 to 3,426 m
- GRN2,942 to 3,372 m
- CBLcement bond log2,947 to 3,379 m
- VDLvariable density log2,988 to 3,384 m
- AA3,008 to 3,425 m
- LL-7laterolog3,008 to 3,429 m
- MLL-Cmicrolaterolog3,008 to 3,429 m
- SNPsidewall neutron porosity3,008 to 3,429 m
Core and petrography reports on file for the well
- 3(2X) Petrography Environment of Depositionpdf · 31.4 MB
Seeing the core itself
The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.
Developers: this page as JSON is GET /v1/data/norway/wells/97/cores/4, documented in the API reference.