NORWAY · WELLBORES · NPDID 9712

6407/8-8 S

Exploration · Wildcat · P&A · Oil/gas · Neptune Energy Norge AS · PL 938

Core 1

Core 1 of 6407/8-8 S was cut from 2,990 to 3,044.1 m, 54.1 m in the Melke Fm and Garn Fm. The Directorate lists core samples from it as available.

54.1
m cored · 2,990 to 3,044.1
2
formation boundaries crossed
5
log runs across it

SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE

Down the core

TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS

DEPTHFORMATIONCOREPHOTOSTHINSEC.SLIDESTESTS2,9903,044.1 m3,0003,0103,0203,0303,040Melke Fm, 2,990 to 2,998 mMelke FmGarn Fm, 2,998 to 3,044.1 mGarn FmCore 1, 2,990 to 3,044.1 mCore 154.1 m

The Directorate has no photographs, thin sections, core-derived slides, or tests on file inside this core's interval. The well's core reports, where there are any, are below.

What it was cut through

UnitFrom, mTo, mCore in it, m
Melke Fm2,9902,9988
Garn Fm2,9983,044.146.1

Every formation top in 6407/8-8 S →

Logs run across it

5 RUNS COVERING PART OF THE INTERVAL

  • ZAIT PPC MSIP NGI PEXpowered positioning caliper · modular sonic imaging platform (Sonic Scanner) · Platform Express (resistivity, density, neutron)2,863 to 3,539 m
  • LWD - DIR GR RES DT DEN NEU VSPlogging while drilling · directional survey · gamma ray · resistivity · density · neutron · vertical seismic profile2,870 to 3,537 m
  • MDTmodular formation dynamics tester3,000 to 3,199 m
  • MDTmodular formation dynamics tester3,000 to 3,179 m
  • ORA3,001 to 3,025 m

Logs, casing, and the files you can open →

Seeing the core itself

The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.

Developers: this page as JSON is GET /v1/data/norway/wells/9712/cores/1, documented in the API reference.