NORWAY · WELLBORES · NPDID 9863
35/10-10 A
Exploration · Appraisal · P&A · Gas/condensate · Wellesley Petroleum AS · PL 1148
Core 2
Core 2 of 35/10-10 A was cut from 4,277.8 to 4,332.8 m, 55 m in the Etive Fm, Rannoch Fm, and Oseberg Fm. The Directorate lists core samples from it as available.
- 55
- m cored · 4,277.8 to 4,332.8
- 2
- formation boundaries crossed
- 7
- log runs across it
SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE
Down the core
TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS
The Directorate has no photographs, thin sections, core-derived slides, or tests on file inside this core's interval. The well's core reports, where there are any, are below.
What it was cut through
| Unit | From, m | To, m | Core in it, m |
|---|---|---|---|
| Etive Fm | 4,277.8 | 4,305 | 27.2 |
| Rannoch Fm | 4,305 | 4,325 | 20 |
| Oseberg Fm | 4,325 | 4,332.8 | 7.8 |
Logs run across it
7 RUNS COVERING PART OF THE INTERVAL
- CMR XPT GRcombinable magnetic resonance · formation pressure tester (PressureXpress) · gamma ray4,050 to 4,465 m
- PPC MSIP NGIpowered positioning caliper · modular sonic imaging platform (Sonic Scanner)4,050 to 4,465 m
- ZAIT ADT TLD HNGS GRthree-detector lithology density · spectral gamma ray (hostile environment) · gamma ray4,050 to 4,465 m
- SWCsidewall cores4,193 to 4,454 m
- LWD - NBGR PWD DEN CAL RES NEU Dlogging while drilling · near-bit gamma ray · pressure while drilling · density · caliper · resistivity · neutron4,234 to 4,416 m
- MDTmodular formation dynamics tester4,243 to 4,431 m
- MDTmodular formation dynamics tester4,297 to 0 m
Seeing the core itself
The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.
Developers: this page as JSON is GET /v1/data/norway/wells/9863/cores/2, documented in the API reference.