NORWAY · WELLBORES · NPDID 9953
6406/3-12 S
Exploration · Appraisal · P&A · Oil/gas · Wintershall Dea Norge AS · PL 836 S
What was run in 6406/3-12 S and how the hole was built: the logs with their intervals, the casing strings with leak-off tests, and the mud at depth.
The table below says which logs were run and over what interval. The curves themselves are held in Diskos, Norway's national data repository; its public portal lists what has been released for a wellbore and can be ordered for an administrative fee. Diskos public portal →
Logs
| Log | Top, m | Base, m |
|---|---|---|
| LWD - RES PWD GR DIRLWD logging while drilling · RES resistivity · PWD pressure while drilling · GR gamma ray · DIR directional survey | 340 | 2,105 |
| USIT CBLUSIT ultrasonic imager (cement and casing) · CBL cement bond log | 2,000 | 4,105 |
| LWD - GR RES PWD CAL DEN NEU FTWLWD logging while drilling · GR gamma ray · RES resistivity · PWD pressure while drilling · CAL caliper · DEN density · NEU neutron | 2,105 | 4,115 |
| USIT CBLUSIT ultrasonic imager (cement and casing) · CBL cement bond log | 3,440 | 4,105 |
| PCC NGIT SFT EDTC LEHEDTC telemetry cartridge with gamma ray | 4,083 | 4,528 |
| QAIT ILE HAPS HLDS LDSC PPC MASTHLDS hostile litho-density sonde · PPC powered positioning caliper | 4,085 | 4,528 |
| NGI MSIP HXPTMSIP modular sonic imaging platform (Sonic Scanner) | 4,108 | 4,785 |
| QAIT APS HLDS MSIP NGIAPS accelerator porosity sonde · HLDS hostile litho-density sonde · MSIP modular sonic imaging platform (Sonic Scanner) | 4,108 | 4,785 |
| CMR XPTCMR combinable magnetic resonance · XPT formation pressure tester (PressureXpress) | 4,113 | 4,537 |
| LWD - GR PWD RES DIR DEN CAL NEWLWD logging while drilling · GR gamma ray · PWD pressure while drilling · RES resistivity · DIR directional survey · DEN density · CAL caliper | 4,115 | 4,528 |
| MCST | 4,122 | 4,544 |
| XLR | 4,122 | 4,488 |
| MDTMDT modular formation dynamics tester | 4,169 | 4,483 |
| HXPT | 4,318 | 4,459 |
| HXPT CMRCMR combinable magnetic resonance | 4,450 | 4,785 |
| LWD - GR PWD RES DIR DEN CAL NEULWD logging while drilling · GR gamma ray · PWD pressure while drilling · RES resistivity · DIR directional survey · DEN density · CAL caliper · NEU neutron | 4,528 | 4,785 |
| PSXLD SAT MSRLD POHP IFA SOEXTIFA in-situ fluid analyzer | 4,535 | 4,772 |
Casing and leak-off tests
| Casing | Diameter, in | Depth, m | Hole, in | Hole depth, m | LOT/FIT, g/cm³ | Test |
|---|---|---|---|---|---|---|
| Conductor | 36 | 409 | 42 | 412.5 | 0 | — |
| Interm. | 20 | 1,301 | 26 | 1,309 | 1.72 | FIT |
| Interm. | 13 3/8 | 2,094 | 16 | 2,105 | 1.78 | LOT |
| Interm. | 9 7/8 | 4,108 | 12 1/4 | 4,115 | 1.85 | FIT |
| Open hole | — | 4,785 | 8 1/2 | 4,785 | 0 | — |
Drilling mud
17 READINGS · BY DEPTH
| Depth, m | Weight, g/cm³ | Viscosity, mPa·s | Yield point, Pa | Type |
|---|---|---|---|---|
| 412 | 1.06 | 1 | 0.4 | Water base |
| 428 | 1.39 | 13 | 9.5 | Water base |
| 1,109 | 1.4 | 12 | 9.5 | Water base |
| 1,308 | 1.39 | 13 | 9.5 | Water base |
| 1,364 | 1.5 | 21 | 6.7 | Oil base |
| 1,598 | 1.52 | 23 | 5.7 | Oil base |
| 1,926 | 1.55 | 25 | 9.5 | Oil base |
| 2,105 | 1.57 | 27 | 7.6 | Oil base |
| 2,125 | 1.69 | 24 | 4.3 | Oil base |
| 2,158 | 1.69 | 26 | 5.7 | Invert |
| 3,113 | 1.69 | 47 | 4.3 | Oil based |
| 4,160 | 1.23 | 24 | 7.1 | Oil based |
| 4,528 | 1.25 | 26 | 4.7 | Innovert |
| 4,533 | 1.42 | 26 | 6.7 | Innovert |
| 4,601 | 1.47 | 26 | 8.1 | Innovert |
| 4,610 | 1.46 | 20 | 11.9 | Innovert |
| 4,785 | 1.46 | 26 | 7.6 | Innovert |
The words under each tool string are Petrora's reading of the standard codes in it; a code we do not recognize is left as filed. No composite log has been released for this well, so there is no file to open beside these runs.
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). Log names are the Directorate's tool strings as filed; the plain-word readings beside them are Petrora's, from common industry abbreviations. Depths are metres along the wellbore from the kelly bushing; diameters are inches, as filed.
Developers: this page as JSON is GET /v1/data/norway/wells/9953, documented in the API reference.