OPERATORS · WYOMING

Haug Lawrence

Haug Lawrence has 1 well on file in Wyoming and none of them active.

It last reported production in February 1994; nothing in the twelve months through August 2026.

0
active wells of 1 drilled
0
bbl oil, 12 months through Aug 2026
0
Mcf gas, same 12 months
0
APDs approved in 12 months · 0 not yet spudded

All 1 wells on file under this operator, searchable →

Operator of record and permit operator

1 wells of record

1
it permitted itself
0
acquired: another operator's permit
0
no permit on file

2 wells it permitted

1
run by other operators today
0
live permits, no operator of record yet
0
WOGCC lists no operator of record

A well's operator of record is the WOGCC's, and its permit operator is the one on its latest drilling permit; neither fills in for the other. Its wells of record are counted as its wells, with its live permits; a well it permitted that another operator runs, or that the WOGCC lists with no operator at all, is not. Each count opens the wells it counts. Transfers and operator numbers →

By county

CountyActive wellsOil, 12 moGas, 12 mo
Laramie0 of 100

The twelve months its wells of record reported, whoever operated them then.

By field

FieldActive wellsOil, 12 moGas, 12 mo
Muddy Creek000

Latest APDs

All of them →
ApprovedWellCountyProposed formationTarget depthNow
Jul 17, 1980Champlin 325 Amoco B 149-021-20222LaramieJ Sand8,408 ftSpuddedAug 1, 1980
Dec 17, 1976Jessen 22-549-021-20158LaramieJ Sand7,421 ftSpuddedJan 11, 1977

About this data

Wyoming Oil and Gas Conservation Commission (WOGCC). Haug Lawrence is identified by its operator. Well counts are the wells it is operator of record for today; volumes are what it filed under that number, through Aug 2026 for production and Aug 2026 for injection. The Commission's production file names each well's current operator on every month, so an operator's figures are those of the wells it operates today. Nothing is estimated.

Developers: this page as JSON is GET /v1/data/operators/wy/oc25f107277, documented in the API reference.