OKLAHOMA · WELLS · ALFALFA COUNTY · API 35-003-22228
Bonnie Jean SWD #1-22
ActiveVertical disposal (commercial) well
- Operator
- Neilson Inc
- County
- Alfalfa
- Formation
- Layton
A vertical disposal (commercial) well in Alfalfa County, Oklahoma, operated by Neilson Inc. OCC status: active.
Spudded March 8, 2012 and drilled to 7,200 ft measured depth.
Completed in one formation: Layton.
It has taken 3,222,539 bbl of injected water since May 2012, 169,976 bbl of it in the twelve months through December 2025.
Wells nearby
Every well with a location on file around this one, in any state, nearest first.
Loading the wells nearby…
Reported injection
3,222,539 bbl of water injected since May 2012. Reported through Dec 2025. The injection record here begins in 2011; injection before then is not shown.
12 months through Dec 2025 169,976 · prior 12 185,378(-8%)
Bonnie Jean SWD #1-22: Injected water by month.
Completions
ONE PER FORMATION THE WELL IS COMPLETED IN
| Formation | Status | Perforations, ft | Completed |
|---|---|---|---|
| Layton | Active | 4,620 to 4,676 | May 22, 2017 |
Well record
- API number
- 35-003-22228
- Location
- SE SW SW SE-22-27N-09W · 267 FSL, 506 FWL
- Coordinates
- 36.79758, -98.15356 ↗
- Ground elevation
- 1,237 ft
- Measured depth
- 7,200 ft
- Perforations
- 4,620 to 4,676 ft
- Intent to drill
- Approved Feb 13, 2012
- Proposed formation
- Arbuckle
- Target depth
- 8,200 ft
- Spudded
- Mar 8, 2012
No oil or gas production is available for this well.
About this data
Oklahoma Corporation Commission (OCC), Oil and Gas Conservation Division. The well, its status, and its type are from the Commission's well file, in OCC's own words; the intent to drill, dates, depths, and formations are from the well's own filings. Injection is what the operator filed on form 1012A, by month; twelve-month figures end in Dec 2025, the last month whose filings are in. No oil or gas production is available for Oklahoma. Nothing is estimated.
Developers: this page as JSON is GET /v1/data/wells/3500322228, documented in the API reference.