OKLAHOMA · WELLS · BEAVER COUNTY · API 35-007-23214

Morris Enhanced Recovery Unit (Fogelman "B"3) #1-3

ActiveVertical enhanced recovery injection well

Operator of record
Resource Oil and Gas LLC
County
Beaver
Formation
Chester Mid

A vertical enhanced recovery injection well in Beaver County, Oklahoma, operated by Resource Oil and Gas LLC. OCC status: active.

Spudded May 14, 1986 and drilled to 7,700 ft measured depth.

Completed in one formation: Chester Mid.

It has taken 301,936 bbl of injected water since January 2011, 2,835 bbl of it in the twelve months through December 2025.

Wells nearby

Every well with a location on file around this well, in any state, nearest first.

Loading the map…

Open the full map →

Reported injection

301,936 bbl of water injected since Jan 2011. Reported through Dec 2025. The injection record here begins in 2011; injection before then is not shown.

12 months through Dec 2025 2,835 · prior 12 28,609(-90%)

05K10K15K201120122013201420152016201720182019202020212022202320242025

Morris Enhanced Recovery Unit (Fogelman "B"3) #1-3: Injected water by month.

Completions

ONE PER FORMATION THE WELL IS COMPLETED IN

FormationStatusPerforations, ftCompleted
Chester MidActive7,279 to 7,291Jan 8, 1991

Well record

API number
35-007-23214
Location
C E2 SW SE-1-03N-21E · 660 FSL, 990 FWL
Ground elevation
2,716 ft
Measured depth
7,700 ft
Perforations
7,279 to 7,291 ft
Spudded
May 14, 1986

No oil or gas production is available for this well.

About this data

Oklahoma Corporation Commission (OCC), Oil and Gas Conservation Division. The well, its status, and its type are from the Commission's well file, in OCC's own words; the intent to drill, dates, depths, and formations are from the well's own filings. Injection is what the operator filed on form 1012A, by month; twelve-month figures end in Dec 2025, the last month whose filings are in. No oil or gas production is available for Oklahoma. Nothing is estimated.

Developers: this page as JSON is GET /v1/data/wells/3500723214, documented in the API reference.