OKLAHOMA · WELLS · CADDO COUNTY · API 35-015-22153
Brown #7
ActiveVertical enhanced recovery injection well
- Operator of record
- Trilogy Natural Resources LLC
- Permitted by
- Lamamco Drilling Company
- County
- Caddo
A vertical enhanced recovery injection well in Caddo County, Oklahoma, operated by Trilogy Natural Resources LLC. OCC status: active.
Spudded August 16, 1991 and drilled to 2,598 ft measured depth.
It has taken 12,693 bbl of injected water since January 2011.
Wells nearby
Every well with a location on file around this well, in any state, nearest first.
Reported injection
12,693 bbl of water injected since Jan 2011. Reported through Dec 2025. The injection record here begins in 2011; injection before then is not shown. This well shows nothing for 2024. There is a data discrepancy in the 2024 injection record that is still under review: part of that year's volume is not matched to its wells. Statewide and operator totals for 2024 include it; some wells and counties show 2024 as under review instead of a figure.
12 months through Dec 2025 0 · prior 12 under review
Brown #7: Injected water by month.
Well record
- API number
- 35-015-22153
- Location
- N2 SW SE NW-28-06N-10W · 467 FSL, 1650 FWL
- Coordinates
- 34.96524, -98.26327 ↗
- Ground elevation
- 1,390 ft
- Measured depth
- 2,598 ft
- Intent to drill
- Approved Aug 8, 1991
- Proposed formation
- Fortuna
- Target depth
- 2,600 ft
- Spudded
- Aug 16, 1991
No oil or gas production is available for this well.
About this data
Oklahoma Corporation Commission (OCC), Oil and Gas Conservation Division. The well, its status, and its type are from the Commission's well file, in OCC's own words; the intent to drill, dates, depths, and formations are from the well's own filings. Injection is what the operator filed on form 1012A, by month; twelve-month figures end in Dec 2025, the last month whose filings are in. No oil or gas production is available for Oklahoma. Nothing is estimated.
Developers: this page as JSON is GET /v1/data/wells/3501522153, documented in the API reference.