OKLAHOMA · WELLS · CADDO COUNTY · API 35-015-36177
West Cement Niles Sand Unit (Dixon 1) #4-1
ActiveVertical enhanced recovery injection well
- Operator of record
- Cemoil Inc
- County
- Caddo
- Formation
- Noble-Olson
A vertical enhanced recovery injection well in Caddo County, Oklahoma, operated by Cemoil Inc. OCC status: active.
Spudded June 16, 1938 and drilled to 3,427 ft measured depth.
Completed in 2 formations: Niles, Noble-Olson.
It has taken 689,497 bbl of injected water since January 2011, 14,129 bbl of it in the twelve months through December 2025.
Wells nearby
Every well with a location on file around this well, in any state, nearest first.
Reported injection
689,497 bbl of water injected since Jan 2011. Reported through Dec 2025. The injection record here begins in 2011; injection before then is not shown.
12 months through Dec 2025 14,129 · prior 12 14,108(+0%)
West Cement Niles Sand Unit (Dixon 1) #4-1: Injected water by month.
Completions
ONE PER FORMATION THE WELL IS COMPLETED IN
| Formation | Status | Perforations, ft | Completed |
|---|---|---|---|
| Niles | Active | 3,370 to 3,394 | Oct 25, 1999 |
| Noble-Olson | Active | 3,174 to 3,238 | Oct 25, 1999 |
Well record
- API number
- 35-015-36177
- Location
- C SE SE NW-35-06N-10W · 330 FSL, 330 FEL
- Coordinates
- 34.95008, -98.22606 ↗
- Ground elevation
- 1,516 ft
- Measured depth
- 3,427 ft
- Perforations
- 3,174 to 3,394 ft
- Spudded
- Jun 16, 1938
No oil or gas production is available for this well.
About this data
Oklahoma Corporation Commission (OCC), Oil and Gas Conservation Division. The well, its status, and its type are from the Commission's well file, in OCC's own words; the intent to drill, dates, depths, and formations are from the well's own filings. Injection is what the operator filed on form 1012A, by month; twelve-month figures end in Dec 2025, the last month whose filings are in. No oil or gas production is available for Oklahoma. Nothing is estimated.
Developers: this page as JSON is GET /v1/data/wells/3501536177, documented in the API reference.